close
close
close
  • Simloc Nut Hex With Captive Washer–1100 Mpa / 235°C-Cadmium - Lubricated

MATERIAL:

  • Nut: Alloy steel 30CD4 or 35CD4 in accordance with TR 3791, heat treated for 40-43 HRC.
  • Washer: Alloy steel 25CD4 or 30CD4 in accordance with TR 3791, heat treated for 315-350HV/5.

SURFACE TREATMENT:

  • Nut: Cadmium plate in accordance with EN 2133 class B + Dry film lubricant in accordance with EN 2491.
  • Washer: Cadmium plate in accordance with EN 2133 class B.

CLASSIFICATION: 1100 MPa (at room temperature) /235°C

THREAD:

  • PROFILE: ISO M in accordance with NFL 05220.
  • TOLERANCES: in accordance with NFL 05224.

TOLERANCES OF FORM AND POSITION: In accordance with ISO 8788.

MARKING: SD in accordance with NFL 22036 on the area indicated on the drawing.

QUALIFICATION AND ACCEPTANCE CONDITIONS: NF L 22-500.

Contact Howmet for the diameter/type in manufacturing.

1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Item #

B - MIN

C - MIN

E

L - MAX

P - MAX

S - MIN

W - NOM

W - TOL.

Thread

Part Family

N/A 7.600 mm N/A 6.500 mm N/A 0.600 mm N/A 11.100 mm N/A 6.800 mm N/A 2.000 mm N/A 6.000 mm N/A h12 N/A M5 x 0.8 – 4H5H N/A PHR 135 M
N/A 9.000 mm N/A 7.600 mm N/A 0.600 mm N/A 12.000 mm N/A 7.150 mm N/A 2.200 mm N/A 7.000 mm N/A h12 N/A M6 x 1.0 – 4H5H N/A PHR 135 M
N/A 12.000 mm N/A 10.900 mm N/A 0.600 mm N/A 14.900 mm N/A 9.000 mm N/A 3.300 mm N/A 10.000 mm N/A h13 N/A M8 x 1.25 – 4H5H N/A PHR 135 M
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1