close
close
close
  • Simloc Nut- Double Hex - 1100 Mpa / 650°C - Silver Plated
MATERIAL: Corrosion resistant steel Z6NCT25 in accordance with EN2399 (FE-PA 2601), heat treated for 27 - 41 HRC.

SURFACE TREATMENT: Silver plate 5µm to 15µm in accordance with EN 2786.

CLASSIFICATION: 1100 MPa (at room temperature) / 650 °C.

THREAD: MJ in accordance with ISO 5855-2

TOLERANCES OF FORM AND POSITION: In accordance with ISO 8788.

MARKING: MJ-SD in accordance with EN 2424 - Category N on the area indicated on the drawing.

QUALIFICATION AND ACCEPTANCE CONDITIONS: EN 3004.

Contact Howmet for the diameter/type in manufacturing.
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Item #

A - MAX

B - MIN

D - MAX

D - MIN

H - MAX

K - MAX

S - MIN

Thread

Part Family

N/A 9.100 mm N/A 8.300 mm N/A 5.800 mm N/A 5.200 mm N/A 7.000 mm N/A 4.900 mm N/A 2.000 mm N/A MJ5 x 0.8 – 4H6H N/A DHE 7-10 CM
N/A 10.600 mm N/A 9.800 mm N/A 7.100 mm N/A 6.300 mm N/A 8.100 mm N/A 5.500 mm N/A 2.300 mm N/A MJ6 x 1 – 4H5H N/A DHE 7-10 CM
N/A 12.100 mm N/A 11.300 mm N/A 8.100 mm N/A 7.300 mm N/A 9.100 mm N/A 6.100 mm N/A 2.600 mm N/A MJ7 x 1 – 4H5H N/A DHE 7-10 CM
N/A 13.600 mm N/A 12.800 mm N/A 9.100 mm N/A 8.300 mm N/A 10.400 mm N/A 6.700 mm N/A 2.800 mm N/A MJ8 x 1 – 4H5H N/A DHE 7-10 CM
N/A 16.800 mm N/A 15.800 mm N/A 11.100 mm N/A 10.300 mm N/A 13.000 mm N/A 8.100 mm N/A 3.100 mm N/A MJ10 x 1.25 – 4H5H N/A DHE 7-10 CM
N/A 19.900 mm N/A 18.800 mm N/A 13.100 mm N/A 12.300 mm N/A 15.000 mm N/A 9.500 mm N/A 3.500 mm N/A MJ12 x 1.25 – 4H5H N/A DHE 7-10 CM
N/A 23.000 mm N/A 21.900 mm N/A 15.200 mm N/A 14.400 mm N/A 17.500 mm N/A 10.700 mm N/A 4.000 mm N/A MJ14 x 1.5 – 4H5H N/A DHE 7-10 CM
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1