Broach Tool - Non-Impact, PS10047 (MA2110-EN2602) Port Serrations, for Material up to 40 HRCNOTES:
Unless Otherwise Specified
- Two extra cutters are provided with each tool. Replacement or spare cutters may be purchased individually.
- Noted runout and the controlled minor diameter of the port will result in a permissible maximum runout of 0.23 between the serration major diameter and the controlled thread minor diameter after broaching.
This broach tool is designed to produce serrations in the counterbore of PS10047 ports. The tool will broach into aluminum, magnesium and other materials with a maximum hardness of 40 HRC.METHOD:
Screw the “A” thread end of the stud into the threaded hole of the port until the stud is seated against the 20° taper in the port. Turn the hex nut in a clockwise direction to broach serrations. Broaching is complete when the tool body contacts the port surface. Using hex at end of the stud turn stud in a counterclockwise direction to retract cutter from port.