close
close
Broach Tool - Non-Impact, PS10047 (MA2110-EN2602) Port Serrations, for Material up to 40 HRC

NOTES: Unless Otherwise Specified
  • Two extra cutters are provided with each tool. Replacement or spare cutters may be purchased individually.
  • Noted runout and the controlled minor diameter of the port will result in a permissible maximum runout of 0.23 between the serration major diameter and the controlled thread minor diameter after broaching.
APPLICATION: This broach tool is designed to produce serrations in the counterbore of PS10047 ports. The tool will broach into aluminum, magnesium and other materials with a maximum hardness of 40 HRC.

METHOD: Screw the “A” thread end of the stud into the threaded hole of the port until the stud is seated against the 20° taper in the port. Turn the hex nut in a clockwise direction to broach serrations. Broaching is complete when the tool body contacts the port surface. Using hex at end of the stud turn stud in a counterclockwise direction to retract cutter from port.
Unit of Measure

Port Dash No.
PS10047
MA2110
EN2602

N/A -295

A Thread
MA1370
-4h6h

N/A MJ27 x 1.5

B

N/A 41.000 mm

C

N/A 20.000 mm

D

N/A 62.700 mm

E ±0.75

N/A 177.650 mm

Thrust Bearing Part No.

N/A NTA-2031

Thrust Bearing Qty.

N/A 3

Cutter Number

N/A RFMOPB295-HDB5