Item # UABP-MV08-04AC, UABP-MV On Howmet Aerospace

Request Information

Unimatic, Blind Bolt Fastener, High Strength, Pull-Type, Positive Mechanical Lock, Protruding Head, Large Footprint, Aluminum coated

Unit of Measure

Specifications
Notes

Nominal Diameter	N/A 08
Design Grip Range Min. - Max.	N/A 0.219 - 0.282
A Head	N/A 0.510 in
B	N/A 0.107 in
C Min	N/A 1.000 in
D	N/A 0.259 in
E Max	N/A 0.370 in
J	N/A 0.375 in
K	N/A 0.975 in
N	N/A 0.190 in
R Rad Max	N/A 0.018 in
(S) Max Ref	N/A 0.361 in
W Min.	N/A 0.363 in
Single Shear Strength	N/A 5000 lb
Tensile Strength	N/A 2100 lb
Spindle Ret.	N/A 1440.000 lb
Hole Size	N/A 0.260 in
Grip Dash No.	N/A 04
Overlap Grip Min	N/A 0.203 in
Overlap Grip Max	N/A 0.298 in
Design Grip Range Min.	N/A 0.219 in
Design Grip Range Max.	N/A 0.282 in
Finish Code	N/A AC
Installed Weight	N/A 7.59 lb
Sleeve Material	N/A CP titanium per ASTM-B348
Pin Material	N/A 38-6-44 titanium per AMS4957
Lock Collar Material	N/A A-286 cres per AMS5737
Sleeve Finish	N/A HI-KOTE 1 aluminum coat per NAS4006 and BMS 10-118
Pin Finish	N/A None
Lock Collar Finish	N/A Passivate per AMS QQ-P-35 and AMS2700
Sleeve Lube	N/A None or cetyl alcohol per (chlorine free) per AS87132 Type1 or dry film lube per AS5272 at manufacture's option
Pin Lube	N/A None or cetyl alcohol (chlorine free) per AS87132 Type1 or dry film lube per AS5272 at menufacture's option
Lock Collar Lube	N/A None or lox compatible dry film lube at manufacturer's option

N/A 1. -05 dia size also available with reduced O.D. drive anvil of .312+.005 (see sheet 3).
2. Applies to grips 05-03 Max, 06-03 Max, 08-04 Max and greater. In shorter grips, a true composite shear test cannot be performed.
3. Trim flash not to exceed .005" maximum length above head of pin.
4. Solid or split lock collar at manufacturer´s option. Split not to exceed .020 width.
5. Knurled to retain fastener assembly. Not part of installed fastener.
6. Blind side head may be installed on 7° max slope.
7. Identification: Huck symbol, MV (for CP titanium sleeve material) and grip dash number.
8. Optional drive washer for installation with blunt tool. Not part of installed fastener.
9. Sleeve diameter "D" may be .002" undersized in this area.
10. Lube and lock collar material at manufacturer´s option.
11. Lubrication:
Serrated pin: None or cetyl alcohol (chlorine free) per AS87132 Type 1 or dry film lube per AS5272 at manufacturer´s option.
Machanical lock: None or lox compatible dry film lube at manufacturer´s option.
Sleeve: NO suffix and AC suffix: None or cetyl alcohol (chlorine free) per AS87132 Type 1 or dry film lube per AS5272 at manufacturer´s option.
12. DF suffix parts when lubed shall use AS5272 on any of the fastener components except mechanical lock may use lox compatible dry film lube (MFG´s option)

Email ^*
First Name ^*
Last Name ^*
Company ^*
Country ^*
Zip/Postal Code ^*

Nominal Diameter

Design Grip Range Min. - Max.

A Head

B

C Min

D

E Max

J

K

N

R Rad Max

(S) Max Ref

W Min.

Single Shear Strength

Tensile Strength

Spindle Ret.

Hole Size

Grip Dash No.

Overlap Grip Min

Overlap Grip Max

Design Grip Range Min.

Design Grip Range Max.

Finish Code

Installed Weight

Sleeve Material

Pin Material

Lock Collar Material

Sleeve Finish

Pin Finish

Lock Collar Finish

Sleeve Lube

Pin Lube

Lock Collar Lube