close
close
close
Request Information
Please click here to view the Installation and Removal

Unit of Measure

Insert Type

 N/A Standard

Series

 N/A RDJ300

Material Type

 N/A 4340 Steel (Alternate 4140 Steel)

Material Specification

 N/A MIL-S-5000 (AMS-S-5625)

Heat Treat

 N/A 160-180 KSI UTS

Finish

 N/A Cadmium Plate per AMS-QQ-P-416, Type II, Class 3

Lockring Howmet Part Number

 N/A RLRR64SB11

Lockring Military Part Number

 N/A MS51990-111P

Internal Thread Lock

 N/A No
A - Internal Thread, Class 3B1 N/A 0.5625-18 UNJF

B - External Thread

 N/A 0.8750-14

B - External Thread - Pitch Diameter

 N/A 0.8291-0.8316 in

B - External Thread - Minor Diameter

 N/A 0.7786-0.7904 in

C - Length ±.015

 N/A 0.880 in

D ±.015

 N/A 0.620 in

E ±.005

 N/A 0.125 in

F ±.005

 N/A 0.578 in
Aluminum Step Drill Part Number2 N/A RCDC64-802
Magnesium Step Drill Part Number3 N/A RCADC64-802
Basic Tap Size4 N/A 0.8750-14 UNF

Wrench Part Number

 N/A R1112W

Lockring Drive Tool Part Number

 N/A R211D
Removal Drill Size5 N/A 25/32

N/A

  • The external thread has a special pitch diameter and minor diameter which installs into an AS8879 Class 3B, FED-STD-H28/2 Class 3B, or National Class 3 tapped hole.
  • Unless otherwise specified dimensions are in inches & per ASME Y14.5M.
  • Mating lockring is not included with insert. It must be ordered separately.
  • For 1117 steel case hardened to 50-60 HRC, add suffix EO328 to lockring part number.
  • When parent material surface is not flat or normal to axis of hole, provide a spotface for proper lockring entry.
  • Remove all burrs and sharp edges.
  • 1 AS8879 Internal Thread
  • 2 Step drills are designed for thru hole drilling. When used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
  • 3 Step drills are designed for thru hole drilling. When used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
  • 4 Taps are not supplied by Howmet.
  • 5 Removal drills are not supplied by Howmet.