close
close
close
Request Information
Please click here to view the Installation and Removal

Unit of Measure

Insert Type

 N/A Standard

Series

 N/A RDJ300

Material Type

 N/A 6AI-4V Titanium

Material Specification

 N/A AMS 4967

Heat Treat

 N/A 160 KSI UTS min

Finish

 N/A None

Lockring Howmet Part Number

 N/A RLRR18SB6

Lockring Military Part Number

 N/A MS51990-103P

Internal Thread Lock

 N/A No
A - Internal Thread, Class 3B1 N/A 0.1380-40 UNJF

B - External Thread

 N/A 0.2160-28

B - External Thread - Pitch Diameter

 N/A 0.1931-0.1946 in

B - External Thread - Minor Diameter

 N/A 0.1674-0.1740 in

C - Length ±.015

 N/A 0.310 in

D ±.015

 N/A 0.190 in

E ±.005

 N/A 0.040 in

F ±.005

 N/A 0.140 in
Aluminum Step Drill Part Number2 N/A RCDC18-180
Magnesium Step Drill Part Number3 N/A RCADC18-180
Basic Tap Size4 N/A 0.2160-28 UNF

Wrench Part Number

 N/A R1103W

Lockring Drive Tool Part Number

 N/A R103D
Removal Drill Size5 N/A 1/4

N/A

  • The external thread has a special pitch diameter and minor diameter which installs into an AS8879 Class 3B, FED-STD-H28/2 Class 3B, or National Class 3 tapped hole.
  • Unless otherwise specified dimensions are in inches & per ASME Y14.5M.
  • Mating lockring is not included with insert. It must be ordered separately.
  • For 1117 steel case hardened to 50-60 HRC, add suffix EO328 to lockring part number.
  • When parent material surface is not flat or normal to axis of hole, provide a spotface for proper lockring entry.
  • Remove all burrs and sharp edges.
  • 1 AS8879 Internal Thread
  • 2 Step drills are designed for thru hole drilling. When used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
  • 3 Step drills are designed for thru hole drilling. When used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
  • 4 Taps are not supplied by Howmet.
  • 5 Removal drills are not supplied by Howmet.