close
close
Unimatic® Blind Rivet, General Purpose, Bulbed, Mechanically-Lock-Spindle, Protruding Head, 5056 Aluminum, Monel & A-286 Cres Rivet Sleeves, 1/64 Oversize
Unit of Measure

Dia. Size

N/A 05

1/64 Oversize Nom.

N/A 0.173 in

A Dia. +.003 / -.0013

N/A 0.173 in

B Dia.

N/A 0.312 ±0.016

C +.010 / -.000

N/A 0.067 in

G Min.

N/A 0.788 in

Shear Alum.6

N/A 855 lb

Shear Monel6

N/A 1665 lb

Shear A-286 Cres6

N/A 1880 lb

Tensile Alum.6

N/A 490 lb

Tensile Monel & A-286 Cres6

N/A 1050 lb

Hole Limits5

N/A 0.176 in0.180 in

Grip Dash No.

N/A 01

Grip Range Min.

N/A 0.031 in

Grip Range Max.

N/A 0.062 in

L Ref.

N/A 0.227 in

F Max.

N/A 0.378 in

Material Sleeve

N/A A286 CRES

Material Spindle

N/A Composition B - 2024 Aluminum per QQ-A-430
Composition EU - A-286 Cres per Chemical RQMT of AMS5737
Composition M - A-286 Cres per Chemical RQMT of AMS5737

Material Lock Ring

N/A Composition B - None
Composition EU - Passivate per QQ-P-35 or Cadmium Plate per QQ-P-416, Type II, Class 3 or Aluminum Coating per NAS4006
Composition M - None or Cadmium Plate per QQ-P-416, Type II, Class 3 or Aluminum Coating per NAS4006

Finish Sleeve

N/A Composition B - None
Composition EU - Passivate per QQ-P-35 or Cadmium Plate per QQ-P-416, Type II, Class 3 or Aluminum Coating per NAS4006
Composition M - None or Cadmium Plate per QQ-P-416, Type II, Class 3 or Aluminum Coating per NAS4006

Finish Spindle

N/A Composition B - Chemically Surface Treat per MIL-C-5541, CL1A
Composition EU - Passivate per QQ-P-35
Composition M - Passivate per QQ-P-35

Finish Lock Ring

N/A Composition B - None
Composition EU - Passivate per QQ-P-35
Composition M - Passivate per QQ-P-35 for A-286 & 316 Cres Only

N/A

  1. .001 shank diameter increase permissible within .100 from base of head.
  2. Marking of aluminum rivets may be on spindle at Manufacturer's option.
  3. "A" diameter may be .001 larger than shown for cadmium plated or aluminum coated sleeves.
  4. "A" diameter may be .001 smaller beyond minimum grip length.
  5. Adjust as required, within these limits, to suit material and application.
  6. Minimum ultimate shear and tensile strengths, in pounds, of installed blind rivet.
  7. Grip symbol for -00 shall be Greek letter Theta "θ"
  8. The rivets covered in this standard are intended for use as a repair / replacement for NAS1919 or for new design applications.
  9. Optional drive washer facilitates installation with blunt nose tool. Drive washer not part of the installed fastener.