close
close
Unit of Measure

Series

N/A SFR5902( )( )(D)L(R)

Material Specification

N/A MIL-S-6049

Material

N/A 8740 Alloy Steel per MIL-S-6049

Heat Treat

N/A 160 - 180 KSI UTS

Finish

N/A Cadmium plate per QQ-P-416, Type II, Class 3

Nut End Type

N/A Drilled

A Nut End Thread Size

N/A 0.2500-28 UNJF-3A

Stud End type

N/A No Recess

B Stud End Thread Size

N/A 0.4375-20 UNJF-3B

B Stud End Thread-Pitch Diameter

N/A 0.4084-0.4067 in

B Stud End Thread-Minor Diameter

N/A 0.3795-0.3700 in

C ±.010

N/A 0.673 in

D - Dia

N/A 0.249-0.246 in

E - Dia +.005 -.004

N/A 0.316 in

F - Dia +.007 -.002

N/A 0.345 in

G - Dia +.000 -.015

N/A 0.370 in

H - Dia Min

N/A 0.294 in

J

N/A 20.000

K +2 -1

N/A 102.000 º

T ±.015

N/A 0.594 in

V

N/A 0.155 Inch

P - Dia ±.010

N/A 0.190 in

S ±.015

N/A 0.160 in

U - Dia +.005 -.002

N/A 0.067 in

L ±.015

N/A 1.188 in

Lockring - Carbon Steel

N/A RLRR1997-104

Lockring - A-286 Cres

N/A RLRR1997E104

Grip Length

N/A 0.594 in

Shank Length

N/A 0.125 in

AA Thread

N/A 0.4375-20 UNJF-3B

AB Dia +.005 -.000

N/A 0.453 in

AC +.015 -.000

N/A 0.151 in

AD Min. Full Thread Depth

N/A 0.723 in

Step Drill Part Number

N/A SDC453JF

Drive Wrench Number

N/A R1106W

Lockring Drive Tool Part Number

N/A SFR5902-4D

Notes

N/A
  • <1>The studend thread has a special pitch dia and minor dia which installs into a MIL-S-8879 tapped hole.
  • Surface Roughness: Machined surfaces to be 125microinches in accordance with ANSI B46.1 except serrated collar.
  • <3>Maximum 2 incomplete threads
  • Lockring RLRR1997-() series is 1117 Carbon Steel (ASTM A108), 36-45 HRC, Cad plated per QQ-P-416, TY II, Cl3.
  • Lockring RLRR1997E() series is A-286 Cres (AMS5731 or AMS6734), 269 HB Min, Passivated per QQ-P-35.
  • Fillets: R .030 Maximum
  • Edges: Edges broken .003-.015

    Installation Procedure:
    • Axis of hole to be normal to entry surface or provide spotface whenrequired.
    • Install insert to depth shown.
    • Drive lockring to depth shown.
    • Step drills are designed for thru hole drilling, When used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
    • These studs are primarily designed for use in soft materials (alum, mag, etc). For use in harder materials, cotact us.