Item # SFR5902A644D11R, Stud - Locked In, Ring Locked, Serrated, High Strength, Oversize Replacement On Howmet Aerospace

Request Information

Unit of Measure

Series	N/A SFR5902( )( )(D)L(R)
Material Specification	N/A MIL-S-6049
Material	N/A 8740 Alloy Steel per MIL-S-6049
Heat Treat	N/A 160 - 180 KSI UTS
Finish	N/A Cadmium plate per QQ-P-416, Type II, Class 3
Nut End Type	N/A Drilled
A Nut End Thread Size	N/A 0.3125-24 UNJF-3A
Stud End type	N/A Recess
B Stud End Thread Size	N/A 0.5000-20 UNJF-3B
B Stud End Thread-Pitch Diameter	N/A 0.4711-0.4694 in
B Stud End Thread-Minor Diameter	N/A 0.4422-0.4325 in
C ±.010	N/A 0.725 in
E - Dia +.005 -.004	N/A 0.380 in
F - Dia +.007 -.002	N/A 0.407 in
G - Dia +.000 -.015	N/A 0.432 in
H - Dia Min	N/A 0.357 in
J	N/A 24.000
K +2 -1	N/A 102.000 º
M ref	N/A 0.443 in
N -Dia	N/A 0.222 in
T ±.015	N/A 0.688 in
V	N/A 0.200 Inch
P - Dia ±.010	N/A 0.242 in
S ±.015	N/A 0.160 in
U - Dia +.005 -.002	N/A 0.067 in
L ±.015	N/A 0.688 in
Lockring - Carbon Steel	N/A RLRR1997-105
Lockring - A-286 Cres	N/A RLRRE105

Step Drill Part Number	N/A SDC515JF
Drive Wrench Number	N/A R1107XW
Lockring Drive Tool Part Number	N/A SFR5902-5D

Notes

N/A

<1>The studend thread has a special pitch dia and minor dia which installs into a MIL-S-8879 tapped hole.
Surface Roughness: Machined surfaces to be 125microinches in accordance with ANSI B46.1 except serrated collar.
<3>Maximum 2 incomplete threads
Lockring RLRR1997-() series is 1117 Carbon Steel (ASTM A108), 36-45 HRC, Cad plated per QQ-P-416, TY II, Cl3.
Lockring RLRR1997E() series is A-286 Cres (AMS5731 or AMS6734), 269 HB Min, Passivated per QQ-P-35.
Fillets: R .030 Maximum
Edges: Edges broken .003-.015

Axis of hole to be normal to entry surface or provide spotface whenrequired.
Install insert to depth shown.
Drive lockring to depth shown.
Step drills are designed for thru hole drilling, When used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
These studs are primarily designed for use in soft materials (alum, mag, etc). For use in harder materials, cotact us.