close
close
close
  • RFOPB5000HDB_primary
Broach Tool - Non-Impact, PS10040 Port Serrations, for Material up to 40 HRC

NOTES: Unless Otherwise Specified
  • This tool will broach serrations into most materials with hardness up to 40 HRC.
  • Two extra cutters are provided with each tool.
  • Replacement studs may be purchased individually
  • Replacement cutters may be purchased individually
  • Use of this tool will provide an allowable maximum runout of .009 between serration major diameter and controlled minor diameter (REF: PS10040) after broaching.
1 - 10 of 10 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Item #

Cutter Number

A Thread
MIL-S-8879
CLASS-3A

B Hex

C Hex

D Dia.

E ± .03

To Produce
Serrations for
Port Number

N/A RFPBT9502HDB5 N/A 0.437-28 UNJEF N/A 1.000 Inch N/A 0.312 Inch N/A 1.817 Inch N/A 4.630 Inch N/A PS10040-02
N/A RFPBT9503HDB5 N/A 0.500-28 UNJEF N/A 1.000 Inch N/A 0.343 Inch N/A 2.007 Inch N/A 4.700 Inch N/A PS10040-03
N/A RFPBT9504HDB5 N/A 0.562-24 UNJEF N/A 1.000 Inch N/A 0.375 Inch N/A 2.007 Inch N/A 4.860 Inch N/A PS10040-04
N/A RFPBT9505HDB5 N/A 0.6250-24 UNJEF N/A 1.000 Inch N/A 0.438 Inch N/A 2.287 Inch N/A 4.470 Inch N/A PS10040-05
N/A RFPBT9506HDB5 N/A 0.6875-24 UNJEF N/A 1.000 Inch N/A 0.500 Inch N/A 2.287 Inch N/A 4.500 Inch N/A PS10040-06
N/A RFPBT9508HDB5 N/A 0.9375-20 UNJEF N/A 1.250 Inch N/A 0.750 Inch N/A 2.977 Inch N/A 5.500 Inch N/A PS10040-08
N/A RFPBT9510HDB5 N/A 1.0625-18 UNJEF N/A 1.375 Inch N/A 0.750 Inch N/A 2.997 Inch N/A 5.705 Inch N/A PS10040-10
N/A RFPBT9512HDB5 N/A 1.2500-18 UNJEF N/A 1.625 Inch N/A 1.000 Inch N/A 2.997 Inch N/A 6.120 Inch N/A PS10040-12
N/A RFPBT9516HDB5 N/A 1.5000-18 UNJEF N/A 1.625 Inch N/A 1.062 Inch N/A 2.997 Inch N/A 6.120 Inch N/A PS10040-16
N/A RFPBT9520HDB5 N/A 1.8750-16 UNJ N/A 2.000 Inch N/A 1.125 Inch N/A 3.852 Inch N/A 6.625 Inch N/A PS10040-20
1 - 10 of 10 | Results Per Page | View | Unit of Measure
1