close
close
Standard Port Contour Cutter, Short Series - Carbide Tipped, PS10040 (AS1300) Port

APPLICATION:This tool counterbores, countersinks, provides a radius and produces a tap drill diameter in one pass. Countours are ground to insure concentricity. Cutter geometry permits the use of these tools with most common materials
1 - 10 of 10 | Results Per Page | View | Unit of Measure
1 

Item #

A (+.0000/-.0003)

B ± .0005

C ± .0003

D ± .005

E ± .030

Port Thread

Port Number

N/A 0.500 Inch N/A 0.406 Inch N/A 0.673 Inch N/A 0.700 Inch N/A 3.450 Inch N/A 0.4375-28 UNJEF N/A PS10040-02
N/A 0.500 Inch N/A 0.468 Inch N/A 0.736 Inch N/A 0.645 Inch N/A 3.645 Inch N/A 0.5000-28 UNJEF N/A PS10040-03
N/A 0.500 Inch N/A 0.525 Inch N/A 0.798 Inch N/A 0.750 Inch N/A 3.750 Inch N/A 0.5625-24 UNJEF N/A PS10040-04
N/A 0.500 Inch N/A 0.587 Inch N/A 0.861 Inch N/A 0.750 Inch N/A 3.750 Inch N/A 0.6250-24 UNJEF N/A PS10040-05
N/A 0.500 Inch N/A 0.650 Inch N/A 0.908 Inch N/A 0.800 Inch N/A 3.800 Inch N/A 0.6875-24 UNJEF N/A PS10040-06
N/A 0.750 Inch N/A 0.892 Inch N/A 1.158 Inch N/A 1.005 Inch N/A 4.255 Inch N/A 0.9375-20 UNJEF N/A PS10040-08
N/A 0.750 Inch N/A 1.011 Inch N/A 1.283 Inch N/A 1.120 Inch N/A 4.370 Inch N/A 1.0625-18 UNJEF N/A PS10040-10
N/A 0.750 Inch N/A 1.199 Inch N/A 1.502 Inch N/A 1.240 Inch N/A 7.740 Inch N/A 1.2500-18 UNJEF N/A PS10040-12
N/A 0.750 Inch N/A 1.449 Inch N/A 1.768 Inch N/A 1.240 Inch N/A 4.740 Inch N/A 1.5000-18 UNJEF N/A PS10040-16
N/A 0.750 Inch N/A 1.817 Inch N/A 2.158 Inch N/A 1.330 Inch N/A 4.830 Inch N/A 1.8750-16 UNJ N/A PS10040-20
1 - 10 of 10 | Results Per Page | View | Unit of Measure
1