close
close
close
Request Information
Unit of Measure

Series

 N/A 4002

Head Style

 N/A #2 Cross Recess

Stud Material

 N/A 4037 Steel per AMS 6300, ASTM A331, ASTM A322, ASTM A752 or 1008-1010 Steel per ASTM A108

Cup Material

 N/A Carbon Steel per ASTM A684

Spring Material

 N/A Music Wire per ASTM A228

Spacer Material

 N/A Carbon Steel per ASTM A109, ASTM A682 or ASTM A684

Cross Pin Material

 N/A Music Wire per ASTM A228

Finish

 N/A Zinc Plate per ASTM B633, Type III, Class 5 (Yellow Chromate)

L

 N/A 0.893-0.903 in

S

 N/A 1.170 in

Approx. Weight/100

 N/A 1.270 lb

N/A

  • Cross pin will withstand push-out force of 175 Lbs. for steel parts and 50 Lbs. for Cres parts retain symmetrically about centerline of stud within ±.02.
  • Suffix "X" only available for suffix "None" and "S" for Dash Numbers 3, 4, 5 & 6. head mark shall include an "X". Suffix "X" Parts are 0.015 longer than standard parts and are intended for use when panel thickness crosses tabulated values in catalog.
  • Unless otherwise specified dimensions are in inches & per ANSI Y14.5M.

    For Dash Number not shown in Table use:
    L Min = 0.353 + (Dash Number x 0.030)
    L Max = L Min + 0.010
    S = 0.630 + (Dash Number x 0.030)
    Approx Weight (lb/100) for Steel= 0.92 + (Dash Number x 0.0193)
    Approx Weight (lb/100) for Stainless Steel= 0.93 + (Dash Number x 0.0193)