N/A

• Cross pin will withstand push-out force of 175 Lbs. for steel parts and 50 Lbs. for Cres parts retain symmetrically about centerline of stud within ±.02.
• Suffix "X" only available for suffix "None" and "S" for Dash Numbers 3, 4, 5 & 6. head mark shall include an "X". Suffix "X" Parts are 0.015 longer than standard parts and are intended for use when panel thickness crosses tabulated values in catalog.
• Unless otherwise specified dimensions are in inches & per ANSI Y14.5M.

For Dash Number not shown in Table use:
L Min = 0.353 + (Dash Number x 0.030)
L Max = L Min + 0.010
S = 0.630 + (Dash Number x 0.030)
Approx Weight (lb/100) for Steel= 0.92 + (Dash Number x 0.0193)
Approx Weight (lb/100) for Stainless Steel= 0.93 + (Dash Number x 0.0193)