close
close
This series utilizes a variety of grommets which must be installed into the top panel. They significantly enhance the system’s performance.
Contact us for strengths for stainless steel stud assemblies and for other styles, materials, or finishes.
Unit of Measure

Series

N/A 4002

Stud Material

N/A 300 CRES per QQ-S-763, ASTM A276, ASTM 493, ASTM A580

Cup & Spacer Material

N/A 300 CRES per ASTM A167, ASTM A240, ASTM A582, AMS-QQ-S-S763

Spring & Cross Pin Material

N/A 300 CRES per QQ-S-763, ASTM A313

Head Style

N/A Slotted

Finish

N/A Passivate per ASTM A967. Stud and Cup Black Oxide per MIL-DTL-13924

L

N/A 0.743-0.753 in

C

N/A 0.532 in

S

N/A 1.020 in

Ultimate Tensile Strength

N/A 1050.000 lb

Working Strength

N/A 700.000 lb

Stud Grip Increments

N/A 0.030 in

Minimum Preload

N/A 50.000 lb

Maximum Service Temperature

N/A 450.000 ºF

Weight/100

N/A 1.184 lb

N/A

  • Cross Pin will withstand a pushout force of 50 lb for CRES or 100lb for Music Wire and retain symmetrical about centerline of stud within ±.020
  • Spacer(s) may be required for functionality purpose
  • Parts will meet all requirements of NASM5591
    For other Dash Numbers not listed use:
    L min = (Dash No. x .030) + .353
    L max = L min + .010
    S = (Dash No. x .03) + .63
    Approximate weight = lb/100
    Steel Slotted = .9172 + (Dash No. x .0193)
    Steel Wing = 1.562 + (Dash No. x .0193)
    Steel Knurled = 2.651 + (Dash No. x .0193)
    Cres Slotted = .930 + (Dash No. x .0195)
    Cres Wing = 1.582 + (Dash No. x .0195)