close
close
close
MATERIAL:
  • Bracket: Carbon Steel per AMS 5085, heat treat to HRc 42-47 Housing: Cres per AMS 5514
  • Nut: Carbon Steel per AMS 5085, heat treat to 160 Ksi min ultimate tensile strength
  • Sleeve: Cres per AMS 5639 or AMS 5514
  • Seal: Buna-N per MIL-R-6855, Class 1 & 2, Grade 60
FINISH CODE:
  • Bracket, Sleeve & Nut: Cad plate per AMS QQ-P-416, Type II, Class 2
  • Housing: Passjvate per AMS-QQ-P-35
  • Nut: Dri-Film Lube per MIL-PRF-46010
  • Seal: none
Unit of Measure

Nut Type

 Non-Locking
Thread Size1 0.1900-24 UNJC-3B
Lead2 Single (Coarse)

H Max.

 0.425 Inch

L

 0.136 Inch

Ø M Max.

 0.231 Inch

Ø M Min.

 0.227 Inch

Ø Q +.0030/-.0000

 0.2345 Inch

Ø R1 +.020/-.000

 0.348 Inch

Ø R2 ±.005

 0.328 Inch

Ø S +.004/-.000

 0.190 Inch

Ø U Max.

 0.1940 Inch

Ø U Min.

 0.1922 Inch

Ø W

 0.655 Inch

Y

 0.288 Inch

Ø Z

 0.245 Inch

G1

 0.188 - 0.218 Inch

G2

 0.228 - 0.258 Inch
K3 0.254 Inch

Thread Type

 Unified
  • 1 Class –3B threads per MIL-S-8879.
  • 2 Identification Dot: (PCD 160147)
          Yellow - Coarse threads
          Green – Non-Locking standard threads
          None-Locking standard threads
  • 3 "K" is measured from the bottom of the rolled-over housing.