close
close
MATERIAL:
  • Bracket: Carbon Steel per AMS 5085, heat treat to HRc 42-47 Housing: Cres per AMS 5514
  • Nut: Carbon Steel per AMS 5085, heat treat to 160 Ksi min ultimate tensile strength
  • Sleeve: Cres per AMS 5639 or AMS 5514
  • Seal: Buna-N per MIL-R-6855, Class 1 & 2, Grade 60
FINISH CODE:
  • Bracket, Sleeve & Nut: Cad plate per AMS QQ-P-416, Type II, Class 2
  • Housing: Passjvate per AMS-QQ-P-35
  • Nut: Dri-Film Lube per MIL-PRF-46010
  • Seal: none
Unit of Measure

Nut Type

N/A Locking
Thread Size1 N/A 0.1640-32 UNJC-3B
Lead2 N/A Single

H Max.

N/A 0.405 Inch

L

N/A 0.136 Inch

Ø M Max.

N/A 0.205 Inch

Ø M Min.

N/A 0.201 Inch

Ø Q +.0030/-.0000

N/A 0.2085 Inch

Ø R1 +.020/-.000

N/A 0.322 Inch

Ø R2 ±.005

N/A 0.302 Inch

Ø S +.004/-.000

N/A 0.164 Inch

Ø U Max.

N/A 0.1680 Inch

Ø U Min.

N/A 0.1662 Inch

Ø W

N/A 0.655 Inch

Y

N/A 0.288 Inch

Ø Z

N/A 0.219 Inch

G1

N/A 0.063 - 0.094 Inch

G2

N/A 0.107 - 0.133 Inch
K3 N/A 0.130 Inch

Thread Type

N/A Unified

N/A A minimum of two threads are deformed to produce self-locking action per MIL-N-25027 when locking feature is desired.

N/A

  • Nut element has .060 total radial float.
  • For high volume installation rates, alternative power tooling is available: contact alcos fastening systems sales dept.
  • Dimensions apply after installation due to the sleeve collapsing

    • 1 Class –3B threads per MIL-S-8879.
    • 2 Identification Dot: (PCD 160147)
            Yellow - Coarse threads
            Green – Non-Locking standard threads
            None-Locking standard threads
    • 3 "K" is measured from the bottom of the rolled-over housing.