Item # SLPCT6010L-12C-L, SLPCT6010 Self-Sealing Nutplate, Reduced Dia. Sleeve, Close Tolerance, Low Profile On Howmet Aerospace

Request Information

MATERIAL:

Bracket: Carbon Steel per AMS 5085, heat treat to HRc 42-47 Housing: Cres per AMS 5514
Nut: Carbon Steel per AMS 5085, heat treat to 160 Ksi min ultimate tensile strength
Sleeve: Cres per AMS 5639 or AMS 5514
Seal: Buna-N per MIL-R-6855, Class 1 & 2, Grade 60

FINISH CODE:

Unit of Measure

N/A A minimum of two threads are deformed to produce self-locking action per MIL-N-25027 when locking feature is desired.

N/A

Nut element has .060 total radial float.

For high volume installation rates, alternative power tooling is available: contact alcos fastening systems sales dept.

Dimensions apply after installation due to the sleeve collapsing

¹ Class –3B threads per MIL-S-8879.
² Identification Dot: (PCD 160147)
      Yellow - Coarse threads
      Green – Non-Locking standard threads
      None-Locking standard threads
³ "K" is measured from the bottom of the rolled-over housing.

Nut Type