close
close
close
MATERIAL:
  • Sleeve: Cres per AMS 5639 (304) or AMS 5514 (305).
  • Bracket: Cres per AMS 5528 (17-7), heat treat to 180 Ksi minimum ultimate tensile strength.
  • Nut: Cres per AMS 5525. 5737 (A-286), heat treat to 160 Ksi minimum ultimate'tensile strength.
FINISH:
  • Sleeve, Bracket & Nut: Passivate per QQ-P-35.
  • Nut: Dri-Film Lubricant per MIL-L-46010.
  • Sleeve: Red dyed
Unit of Measure

Nut Type

 Locking

Thread Size

 0.1900-24 UNJC-3B
Lead1 Single

Ø M Max.

 0.270 Inch
Ø Q +.004/-.001 - Soft2 0.290 Inch
Ø Q +.004/-.001 - Hard3 0.296 Inch

Ø R1 +.020/-.000

 0.375 Inch

Ø R2 ±.005

 0.370 Inch

Ø U

 0.245 Inch

W

 0.390 Inch

X

 0.572 Inch

Ø Z

 0.313 Inch

G1

 0.031 - 0.062 Inch

G2

 0.074 - 0.106 Inch

K

 0.099 Inch

L - Nut Height

 0.176 Inch

Y - Thread Relief

 0.357 Inch
Weight4 0.415 lb/100

Thread Type

 Unified
  • 1 Nut element color code: (PCD 160147)
          None-Locking standard threads
          Green – Non-Locking standard threads
          Yellow - Coarse threads
          Orange - Fast lead threads
  • 2 Soft- dimension for Soft Aluminum Alloys & Plastics
  • 3 Hard - dimension for Hard Aluminum Alloys & Steel
  • 4 To obtain additional weights add increments of .010/100 per letter code for sizes 4, 4F, 6, 6F;