Item # D6000-3C-GG, D( )6000 Fixed Flaring Nut, Non-Locking, All Sizes, Standard On Howmet Aerospace

Request Information

MATERIAL: D & DSL 6000: 304 Cres per AMS 5639 or AMS-QQ-S-763

FINISH CODE:

D 6000: Passivate per AMS QQ-P-35
DSL 6000: Dri-Film Lubricant per MIL-PRF-46010

Unit of Measure

Finish	N/A Passivate
Thread Size¹	N/A 0.1900-24 UNC-2B
Lead	N/A Single
Ø D	N/A 0.375 Inch
Ø M ±.005	N/A 0.250 Inch
Ø N ±.005²	N/A 0.045 Inch
Ø Q +.004/-.001 - Soft³	N/A 0.265 Inch
Ø Q +.004/-.001 - Hard⁴	N/A 0.272 Inch
Ø R1 +.020/-.000	N/A 0.375 Inch
Ø R2 ±.005	N/A 0.330 Inch
X⁵	N/A 0.187 Inch
G1	N/A N/A Inch
G2	N/A 0.417 - 0.448 Inch
K	N/A 0.444 Inch
Thread Type	N/A Unified

N/A

"BB", "CC", etc. Is for countersink only.

N/A

All tools are available only for these sizes:
Inches: 04 thru 4; Metric: M3 thru M6

Grip code.

Thread size code.

For installation tool designations: "B" is for Counterbore & "S" is for Countersink.

Thread dimensions apply prior to application of Dri-Film Lubricant. Possible thread tightness due to lube buildup will diminish following engagement of Mating Part.

¹ -2B threads per FED-STD-H2B
² "N" dimension for grip code "AA" is .025 inches
³ Soft - dimension for Soft Aluminum Alloys & Plastics
⁴ Hard - dimension for Hard Aluminum Alloys & Steel
⁵ If height other than standard is desired, indicate after part no.:
Inches: (3 decimal places) I.E. D 6000-04-B-.632

Email ^*
First Name ^*
Last Name ^*
Company ^*
Country ^*
Zip/Postal Code ^*

Finish

Lead

Ø D

Ø M ±.005

Ø R1 +.020/-.000

Ø R2 ±.005

G1

G2

K

Thread Type