close
close
close
Request Information
MATERIAL: D & DSL 6000: 304 Cres per AMS 5639 or AMS-QQ-S-763

FINISH CODE:
  • D 6000: Passivate per AMS QQ-P-35
  • DSL 6000: Dri-Film Lubricant per MIL-PRF-46010
Unit of Measure

Finish

 N/A Passivate
Thread Size1 N/A 0.1380-32 UNC-2B

Lead

 N/A Single

Ø D

 N/A 0.281 Inch

Ø M ±.005

 N/A 0.202 Inch
Ø N ±.0052 N/A 0.045 Inch
Ø Q +.004/-.001 - Soft3 N/A 0.213 Inch
Ø Q +.004/-.001 - Hard4 N/A 0.218 Inch

Ø R1 +.020/-.000

 N/A 0.332 Inch

Ø R2 ±.005

 N/A 0.270 Inch
X5 N/A 0.156 Inch

G1

 N/A N/A Inch

G2

 N/A 0.292 - 0.323 Inch

K

 N/A 0.319 Inch

Thread Type

 N/A Unified

N/A

  • "BB", "CC", etc. Is for countersink only.

    • N/A

  • All tools are available only for these sizes:
         Inches: 04 thru 4; Metric: M3 thru M6
  • Grip code.
  • Thread size code.
  • For installation tool designations: "B" is for Counterbore & "S" is for Countersink.
  • Thread dimensions apply prior to application of Dri-Film Lubricant. Possible thread tightness due to lube buildup will diminish following engagement of Mating Part.

    • 1 -2B threads per FED-STD-H2B
    • 2 "N" dimension for grip code "AA" is .025 inches
    • 3 Soft - dimension for Soft Aluminum Alloys & Plastics
    • 4 Hard - dimension for Hard Aluminum Alloys & Steel
    • 5 If height other than standard is desired, indicate after part no.:
           Inches: (3 decimal places) I.E. D 6000-04-B-.632