close
close
close
Request Information
Please click here to view the Installation and Removal

Unit of Measure

Insert Type

 N/A Standard

Series

 N/A RJ300

Material Type

 N/A A286 CRES

Material Specification

 N/A AMS 5731 or AMS 5732 or AMS 5734 or AMS 5737

Heat Treat

 N/A 83 HRB Min

Finish

 N/A Passivate per AMS2700, Plus Solid Film Lube

Military Part Number

 N/A MS51991-315

Lockring Howmet Part Number

 N/A RLRR100SB12

Lockring Military Part Number

 N/A MS51990-115P
Internal Thread Lock1 N/A Yes

A - Internal Thread, Class 3B

 N/A 1.0000-12 UNJF

B - External Thread

 N/A 1.3750-12

B - External Thread - Pitch Diameter

 N/A 1.3216-1.3241 in

B - External Thread - Minor Diameter

 N/A 1.2628-1.2760 in

C - Length ±.015

 N/A 1.380 in

D ±.015

 N/A 1.020 in
Aluminum Step Drill Part Number2 N/A RCDC100-1289
Magnesium Step Drill Part Number3 N/A RCADC100-1289
Basic Tap Size4 N/A 1.3750-12 UNF

Wrench Part Number

 N/A R1116W

Lockring Drive Tool Part Number

 N/A R315D
Removal Drill Size5 N/A 1 9/32

N/A

  • The external thread has a special pitch diameter and minor diameter which installs into an AS8879 Class 3B, FED-STD-H28/2 Class 3B, or National Class 3 tapped hole.
  • Unless otherwise specified dimensions are in inches & per ASME Y14.5M.
  • Mating lockring is not included with insert. It must be ordered separately.
  • For 1117 steel case hardened to 50-60 HRC, add suffix EO328 to lockring part number.
  • Machine surface to be 125 microinches Ra per ANSI B46.1, except serrated collar.
  • When parent material surface is not flat or normal to axis of hole, provide a spotface for proper lockring entry.
  • Remove all burrs and sharp edges.
  • 1 AS8879 Internal Thread
  • 2 Step drills are designed for thru hole drilling. When used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
  • 3 Step drills are designed for thru hole drilling. When used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
  • 4 Taps are not supplied by Howmet.
  • 5 Removal drills are not supplied by Howmet.