Item # RJ313SU18EO349, RJ300 Inserts - Ring Locked, Fine Internal and External Threads On Howmet Aerospace

Request Information

Please click here to view the Installation and Removal

Unit of Measure

Insert Type	N/A Standard
Series	N/A RJ300
Material Type	N/A A286 CRES
Material Specification	N/A AMS 5731 or AMS 5732 or AMS 5734 or AMS 5737
Heat Treat	N/A 130 KSI UTS min
Finish	N/A Passivate per AMS2700
Military Part Number	N/A MS51991-313
Lockring Howmet Part Number	N/A RLRR82SB12
Lockring Military Part Number	N/A MS51990-113P
Internal Thread Lock¹	N/A No
A - Internal Thread, Class 3B	N/A 0.7500-16 UNJF
B - External Thread	N/A 1.1250-12
B - External Thread - Pitch Diameter	N/A 1.0716-1.0741 in
B - External Thread - Minor Diameter	N/A 1.0128-1.0260 in
C - Length ±.015	N/A 1.120 in
D ±.015	N/A 0.800 in

Aluminum Step Drill Part Number²	N/A RCDC82-1043
Magnesium Step Drill Part Number³	N/A RCADC82-1043
Basic Tap Size⁴	N/A 1.1250-12 UNF
Wrench Part Number	N/A R1114W
Lockring Drive Tool Part Number	N/A R213D
Removal Drill Size⁵	N/A 1 1/32

N/A

The external thread has a special pitch diameter and minor diameter which installs into an AS8879 Class 3B, FED-STD-H28/2 Class 3B, or National Class 3 tapped hole.
Unless otherwise specified dimensions are in inches & per ASME Y14.5M.
Mating lockring is not included with insert. It must be ordered separately.
For 1117 steel case hardened to 50-60 HRC, add suffix EO328 to lockring part number.
Machine surface to be 125 microinches Ra per ANSI B46.1, except serrated collar.
When parent material surface is not flat or normal to axis of hole, provide a spotface for proper lockring entry.
Remove all burrs and sharp edges.

¹ AS8879 Internal Thread
² Step drills are designed for thru hole drilling. When used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
³ Step drills are designed for thru hole drilling. When used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
⁴ Taps are not supplied by Howmet.
⁵ Removal drills are not supplied by Howmet.

Insert Type