close
close
close
Request Information
Please click here to view the Installation and Removal

Unit of Measure

Insert Type

 N/A Standard

Series

 N/A RJ300

Material Type

 N/A A286 CRES

Material Specification

 N/A AMS 5731 or AMS 5732 or AMS 5734 or AMS 5737

Heat Treat

 N/A 130 KSI UTS min

Finish

 N/A Passivate per AMS2700

Lockring Howmet Part Number

 N/A RLRR56SB11

Lockring Military Part Number

 N/A MS51990-110P
Internal Thread Lock1 N/A No

A - Internal Thread, Class 3B

 N/A 0.5000-20 UNJF

B - External Thread

 N/A 0.7500-16

B - External Thread - Pitch Diameter

 N/A 0.7097-0.7122 in

B - External Thread - Minor Diameter

 N/A 0.6656-0.6761 in

C - Length ±.015

 N/A 0.750 in

D ±.015

 N/A 0.490 in
Aluminum Step Drill Part Number2 N/A RCDC56-687
Magnesium Step Drill Part Number3 N/A RCADC56-687
Basic Tap Size4 N/A 0.7500-16 UNF

Wrench Part Number

 N/A R1111W

Lockring Drive Tool Part Number

 N/A R210D
Removal Drill Size5 N/A 11/16

N/A

  • The external thread has a special pitch diameter and minor diameter which installs into an AS8879 Class 3B, FED-STD-H28/2 Class 3B, or National Class 3 tapped hole.
  • Unless otherwise specified dimensions are in inches & per ASME Y14.5M.
  • Mating lockring is not included with insert. It must be ordered separately.
  • For 1117 steel case hardened to 50-60 HRC, add suffix EO328 to lockring part number.
  • Machine surface to be 125 microinches Ra per ANSI B46.1, except serrated collar.
  • When parent material surface is not flat or normal to axis of hole, provide a spotface for proper lockring entry.
  • Remove all burrs and sharp edges.
  • 1 AS8879 Internal Thread
  • 2 Step drills are designed for thru hole drilling. When used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
  • 3 Step drills are designed for thru hole drilling. When used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
  • 4 Taps are not supplied by Howmet.
  • 5 Removal drills are not supplied by Howmet.