Item # RJ309SA14, RJ300 Inserts - Ring Locked, Fine Internal and External Threads On Howmet Aerospace

Request Information

Please click here to view the Installation and Removal

Unit of Measure

Insert Type	N/A Standard
Series	N/A RJ300
Material Type	N/A 4130 Steel
Material Specification	N/A AMS-S-6758, COND F
Heat Treat	N/A 125 KSI UTS min
Finish	N/A Cadmium Plate per AMS-QQ-P-416, Type II, Class 3
Lockring Howmet Part Number	N/A RLRR47SB10
Lockring Military Part Number	N/A MS51990-109P
Internal Thread Lock¹	N/A No
A - Internal Thread, Class 3B	N/A 0.4375-20 UNJF
B - External Thread	N/A 0.6250-18
B - External Thread - Pitch Diameter	N/A 0.5894-0.5914 in
B - External Thread - Minor Diameter	N/A 0.5498-0.5593 in
C - Length ±.015	N/A 0.880 in
D ±.015	N/A 0.640 in

Aluminum Step Drill Part Number²	N/A RCDC47-569
Magnesium Step Drill Part Number³	N/A RCADC47-569
Basic Tap Size⁴	N/A 0.6250-18 UNF
Wrench Part Number	N/A R1110W
Lockring Drive Tool Part Number	N/A R209
Removal Drill Size⁵	N/A 9/16

N/A

The external thread has a special pitch diameter and minor diameter which installs into an AS8879 Class 3B, FED-STD-H28/2 Class 3B, or National Class 3 tapped hole.
Unless otherwise specified dimensions are in inches & per ASME Y14.5M.
Mating lockring is not included with insert. It must be ordered separately.
For 1117 steel case hardened to 50-60 HRC, add suffix EO328 to lockring part number.
Machine surface to be 125 microinches Ra per ANSI B46.1, except serrated collar.
When parent material surface is not flat or normal to axis of hole, provide a spotface for proper lockring entry.
Remove all burrs and sharp edges.

¹ AS8879 Internal Thread
² Step drills are designed for thru hole drilling. When used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
³ Step drills are designed for thru hole drilling. When used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
⁴ Taps are not supplied by Howmet.
⁵ Removal drills are not supplied by Howmet.

Insert Type