Item # RJ106SM8L, RJ100 Inserts - Ring Locked, Coarse Internal and Coarse External Threads On Howmet Aerospace

Request Information

Please click here to view the Installation and Removal

Unit of Measure

Insert Type	N/A Standard
Series	N/A RJ100
Material	N/A 303 CRES
Finish	N/A Passivate per AMS2700, Plus Solid Film Lube
Material Specification	N/A ASM 5640 or ASTM A582
Military Part Number	N/A MS51991-106
Lockring Part Number	N/A RLRR28SA8
Lockring Military Part Number	N/A MS51990-106P
Internal Thread Lock	N/A Yes
A - Internal Thread, Class 3B	N/A 0.2500-20 UNJC
B - External Thread	N/A 0.3750-16
B - External Thread - Pitch Diameter	N/A 0.3347-0.3372 in
B - External Thread - Minor Diameter	N/A 0.2906-0.3011 in
C ± .015	N/A 0.500 in
D ± .015	N/A 0.330 in
Heat Treat	N/A None
E ± .015	N/A 0.170 in
F - Diameter	N/A 0.305 in
G - Diameter	N/A 0.291 in
H - Diameter	N/A 0.260-0.270 in
J - Number of Teeth	N/A 20.000
K +2º -1º	N/A 102.000 º
L - Diameter +.007 -.002	N/A 0.345 in
M - Diameter +.005 -.004	N/A 0.316 in
N ± .015	N/A 0.110 in

Aluminum Step Drill Part Number¹	N/A RCDC28-312
Magnesium Step Drill Part Number²	N/A RCDAC28-312
Basic Tap Size	N/A 0.3750-16UNC
Wrench Part Number	N/A R1106W
Locking Drive Tool	N/A R106D
Removal Drill Size³	N/A 5/16

N/A

The external thread has a special pitch diameter and minor diameter which installs into a AS8879 class 3B, MIL-S-7742 class 3B, or National class 3 tapped hole.
Inserts are installed and removed in accordance with MS51995.
Insert lengths shown are based on installation in 2024-T4 Aluminum and in such materials will accommodate tension loads up to the strength of a mating bolt heat treated to 145,000 PSI UTS. If this design criteria is required in parent materials of lower mechanical properties, longer insert lengths should be specified. Mating bolts should have a thread engagement of 1.5 diameters or if insert has a thread lock, the bolt should extend through the insert 2 pitches including chamfer.
Mating lockring is not included with insert. It must be ordered separately.

¹ Step Drills are designed for thru hole drilling, when used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
² Step Drills are designed for thru hole drilling, when used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
³ Removal Drills are not supplied by Howmet.

Insert Type