close
close
Please click here to view the Installation and Removal

Internal Thread Locking Feature not available at this time.

Unit of Measure

Insert Type

N/A Standard

Series

N/A RJ100

Material

N/A 6AI-4V Titanium

Finish

N/A None

Material Specification

N/A AMS 4967 or MIL-T-9047 COND A

Military Part Number

N/A MS51991-102

Lockring Part Number

N/A RLRR16SA5

Lockring Military Part Number

N/A MS51990-102P

Internal Thread Lock

N/A No

A - Internal Thread, Class 3B

N/A 0.1120-40 UNJC

B - External Thread

N/A 0.1900-24

B - External Thread - Pitch Diameter

N/A 0.1633-0.1648 in

B - External Thread - Minor Diameter

N/A 0.1334-0.1407 in

C ± .015

N/A 0.250 in

D ± .015

N/A 0.150 in

Heat Treat

N/A 130 KSI UTS min

E ± .015

N/A 0.100 in

F - Diameter

N/A 0.148 in

G - Diameter

N/A 0.133-0.138 in

H - Diameter

N/A 0.117-0.122 in

J - Number of Teeth

N/A 14.000

K +2º -1º

N/A 102.000 º

L - Diameter +.007 -.002

N/A 0.175 in

M - Diameter +.005 -.004

N/A 0.152 in

N ± .015

N/A 0.060 in
Aluminum Step Drill Part Number1 N/A RCDC16-149
Magnesium Step Drill Part Number2 N/A RCDAC16-149

Basic Tap Size

N/A 0.1900-24UNC

Wrench Part Number

N/A R1102W

Locking Drive Tool

N/A R102D
Removal Drill Size3 N/A 7/32

N/A

  • The external thread has a special pitch diameter and minor diameter which installs into a AS8879 class 3B, MIL-S-7742 class 3B, or National class 3 tapped hole.
  • Inserts are installed and removed in accordance with MS51995.
  • Insert lengths shown are based on installation in 2024-T4 Aluminum and in such materials will accommodate tension loads up to the strength of a mating bolt heat treated to 145,000 PSI UTS. If this design criteria is required in parent materials of lower mechanical properties, longer insert lengths should be specified. Mating bolts should have a thread engagement of 1.5 diameters or if insert has a thread lock, the bolt should extend through the insert 2 pitches including chamfer.
  • Mating lockring is not included with insert. It must be ordered separately.

  • 1 Step Drills are designed for thru hole drilling, when used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
  • 2 Step Drills are designed for thru hole drilling, when used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
  • 3 Removal Drills are not supplied by Howmet.