Item # RJ102SU4EO349, RJ100 Inserts - Ring Locked, Coarse Internal and Coarse External Threads On Howmet Aerospace

Request Information

Please click here to view the Installation and Removal

Unit of Measure

Insert Type	N/A Standard
Series	N/A RJ100
Material	N/A A286 CRES
Finish	N/A Passivate per AMS2700, Plus Solid Film Lube
Material Specification	N/A AMS 5731 or AMS 5732 or AMS 5734 or AMS 5737
Military Part Number	N/A MS51991E102
Lockring Part Number	N/A RLRR16SA5
Lockring Military Part Number	N/A MS51990-102P
Internal Thread Lock	N/A No
A - Internal Thread, Class 3B	N/A 0.1120-40 UNJC
B - External Thread	N/A 0.1900-24
B - External Thread - Pitch Diameter	N/A 0.1633-0.1648 in
B - External Thread - Minor Diameter	N/A 0.1334-0.1407 in
C ± .015	N/A 0.250 in
D ± .015	N/A 0.150 in
Heat Treat	N/A 130 KSI UTS min
E ± .015	N/A 0.100 in
F - Diameter	N/A 0.148 in
G - Diameter	N/A 0.133-0.138 in
H - Diameter	N/A 0.117-0.122 in
J - Number of Teeth	N/A 14.000
K +2º -1º	N/A 102.000 º
L - Diameter +.007 -.002	N/A 0.175 in
M - Diameter +.005 -.004	N/A 0.152 in
N ± .015	N/A 0.060 in

Aluminum Step Drill Part Number¹	N/A RCDC16-149
Magnesium Step Drill Part Number²	N/A RCDAC16-149
Basic Tap Size	N/A 0.1900-24UNC
Wrench Part Number	N/A R1102W
Locking Drive Tool	N/A R102D
Removal Drill Size³	N/A 7/32

N/A

The external thread has a special pitch diameter and minor diameter which installs into a AS8879 class 3B, MIL-S-7742 class 3B, or National class 3 tapped hole.
Inserts are installed and removed in accordance with MS51995.
Insert lengths shown are based on installation in 2024-T4 Aluminum and in such materials will accommodate tension loads up to the strength of a mating bolt heat treated to 145,000 PSI UTS. If this design criteria is required in parent materials of lower mechanical properties, longer insert lengths should be specified. Mating bolts should have a thread engagement of 1.5 diameters or if insert has a thread lock, the bolt should extend through the insert 2 pitches including chamfer.
Mating lockring is not included with insert. It must be ordered separately.

¹ Step Drills are designed for thru hole drilling, when used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
² Step Drills are designed for thru hole drilling, when used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
³ Removal Drills are not supplied by Howmet.

Insert Type