Item # RJ110SU12LEO349, RJ100 Inserts - Ring Locked, Coarse Internal and Coarse External Threads On Howmet Aerospace

Request Information

Please click here to view the Installation and Removal

Unit of Measure

Insert Type	N/A Standard
Series	N/A RJ100
Material	N/A A286 CRES
Finish	N/A Passivate per AMS2700, Plus Solid Film Lube
Material Specification	N/A AMS 5731 or AMS 5732 or AMS 5734 or AMS 5737
Military Part Number	N/A MS51991E110
Lockring Part Number	N/A RLRR56SA11
Lockring Military Part Number	N/A MS51990-110P
Internal Thread Lock	N/A Yes
A - Internal Thread, Class 3B	N/A 0.5000-13 UNJC
B - External Thread	N/A 0.7500-10
B - External Thread - Pitch Diameter	N/A 0.6860-0.6885 in
B - External Thread - Minor Diameter	N/A 0.6156-0.6308 in
C ± .015	N/A 0.750 in
D ± .015	N/A 0.490 in
Heat Treat	N/A 130 KSI UTS min
E ± .015	N/A 0.260 in
F - Diameter	N/A 0.612 in
G - Diameter	N/A 0.590 in
H - Diameter	N/A 0.515-0.530 in
J - Number of Teeth	N/A 30.000
K +2º -1º	N/A 111.000 º
L - Diameter +.007 -.002	N/A 0.721 in
M - Diameter +.005 -.004	N/A 0.687 in
N ± .015	N/A 0.160 in

Aluminum Step Drill Part Number¹	N/A RCDC56-656
Magnesium Step Drill Part Number²	N/A RCDAC56-656
Basic Tap Size	N/A 0.7500-10UNC
Wrench Part Number	N/A R1111W
Locking Drive Tool	N/A R110D
Removal Drill Size³	N/A 11/1

N/A

The external thread has a special pitch diameter and minor diameter which installs into a AS8879 class 3B, MIL-S-7742 class 3B, or National class 3 tapped hole.
Inserts are installed and removed in accordance with MS51995.
Insert lengths shown are based on installation in 2024-T4 Aluminum and in such materials will accommodate tension loads up to the strength of a mating bolt heat treated to 145,000 PSI UTS. If this design criteria is required in parent materials of lower mechanical properties, longer insert lengths should be specified. Mating bolts should have a thread engagement of 1.5 diameters or if insert has a thread lock, the bolt should extend through the insert 2 pitches including chamfer.
Mating lockring is not included with insert. It must be ordered separately.

¹ Step Drills are designed for thru hole drilling, when used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
² Step Drills are designed for thru hole drilling, when used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
³ Removal Drills are not supplied by Howmet.

Insert Type