close
close
close
Request Information
Please click here to view the Installation and Removal

Unit of Measure

Insert Type

 N/A Blind

Series

 N/A RJ1200

Material Type

 N/A 303 CRES

Material Specification

 N/A AMS-A582 or AMS 5640

Heat Treat

 N/A None

Finish

 N/A Passivate per AMS2700

Lockring Rosan Part Number

 N/A RLRR24SA7

Lockring Military Part Number

 N/A MS51190-105P

Internal Thread Lock

 N/A No
A - Internal Thread, Class 3B1 N/A 0.1900-32 UNJF

B - External Thread

 N/A 0.3125-18

B - External Thread - Pitch Diameter

 N/A 0.2769-0.2789 in

B - External Thread - Minor Diameter

 N/A 0.2373-0.2468 in

C - Length ±.015

 N/A 0.500 in

D ±.015

 N/A 0.350 in

E - Min. Full Thread Depth

 N/A 0.280 in
Aluminum Step Drill Part Number2 N/A RCDC24-257S
Magnesium Step Drill Part Number3 N/A RCADC24-257S
Basic Tap Size4 N/A 0.3125-18 UNC

Wrench Part Number

 N/A R1105W

Lockring Drive Tool Part Number

 N/A R205D
Removal Drill Size5 N/A F

N/A

  • The external thread has a special pitch diameter and minor diameter which installs into an AS8879 Class 3B, MIL-S-7742 Class 3B, or National Class 3 tapped hole.
  • Mating lockring is not included with insert, it must be ordered separately.
  • Unless otherwise specified dimensions are in inches & ASME Y14.5M.
  • 1 AS8879 Internal Thread
  • 2 Step drills are designed for thru hole drilling. When used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
  • 3 Step drills are designed for thru hole drilling. When used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
  • 4 Taps are not supplied by Howmet.
  • 5 Removal drills are not supplied by Howmet.