close
close
close
Request Information
Please click here to view the Installation and Removal

Unit of Measure

Insert Type

 N/A Blind

Series

 N/A RJ1200

Material Type

 N/A 4340 Steel (Alternate 4140 Steel)

Material Specification

 N/A AMS-S-5000 or AMS-S-5625

Heat Treat

 N/A 160-180 KSI UTS

Finish

 N/A Cadmium Plate per AMS-QQ-P-416, Type II, Class 3

Lockring Rosan Part Number

 N/A RLRR18SA6

Lockring Military Part Number

 N/A MS51990-103P

Internal Thread Lock

 N/A No
A - Internal Thread, Class 3B1 N/A 0.1380-40 UNJF

B - External Thread

 N/A 0.2160-24

B - External Thread - Pitch Diameter

 N/A 0.1893-0.1908 in

B - External Thread - Minor Diameter

 N/A 0.1594-0.1667 in

C - Length ±.015

 N/A 0.380 in

D ±.015

 N/A 0.260 in

E - Min. Full Thread Depth

 N/A 0.190 in
Aluminum Step Drill Part Number2 N/A RCDC18-177-6
Magnesium Step Drill Part Number3 N/A RCADC18-177-6
Basic Tap Size4 N/A 0.2160-24 UNC

Wrench Part Number

 N/A R1103W

Lockring Drive Tool Part Number

 N/A R103D
Removal Drill Size5 N/A 1/4

N/A

  • The external thread has a special pitch diameter and minor diameter which installs into an AS8879 Class 3B, MIL-S-7742 Class 3B, or National Class 3 tapped hole.
  • Mating lockring is not included with insert, it must be ordered separately.
  • Unless otherwise specified dimensions are in inches & ASME Y14.5M.
  • 1 AS8879 Internal Thread
  • 2 Step drills are designed for thru hole drilling. When used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
  • 3 Step drills are designed for thru hole drilling. When used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
  • 4 Taps are not supplied by Howmet.
  • 5 Removal drills are not supplied by Howmet.