close
close
Unit of Measure

Style

N/A Encapsulated

Mounting Method

N/A Rivet

Series

N/A 4002

Rivet Holes

N/A Plain

Cage Type

N/A Encapsulated

Material

N/A Silicon Bronze per ASTM B176

Cap Material

N/A Brass per ASTM B36 (Soldered to Receptacle)

Finish

N/A Zinc Plate per ASTM B633, Type II, Class 8 (Yellow Chromate)

Maximum Operating Temperature

N/A 300.000 °F

Install Hole Diameter

N/A 0.128-0.134 in

A

N/A 0.690 in

N/A

  • Where pressure sealing is of a primary importance, a sealing is of a primary importance, a sealing compound such as 3M EC-847 is recommended for the mounting surface and around the seam of cap.
  • Inside surface of attached brass cap may not contain spec plating because of current masking in electro plating process caused by restricted receptacle end opening to internal cap surface. Internal cap surface may also contain residue from trapped rinse water when drying after plating rinse because of the restriction.
  • Unless otherwise specified dimensions are in inches & per ANSI Y14.5M-82.