Item # OUB100-T10-09, Blind Bolt - OUB100-T On Howmet Aerospace

Request Information

Unimatic® Blind Bolt Fastener, High Strength, Pull-Type, Positive Mechanical Lock 100° Flush Head, Alloy Steel (112 KSI Shear) Single Action Installation, 1/64 Oversize

Unit of Measure

Specifications
Notes

Nominal Diameter	N/A 10
A Head Theo Inter Max.	N/A 0.635 in
B Head Height Max.	N/A 0.131 in
C Min.	N/A 1.218 in
D Sleeve Dia.	N/A 0.326 in0.328 in
E Max.	N/A 0.350 in
F Max.	N/A 0.020 in
G Gage Dia. ± .0001	N/A 0.545 in
H Gage Height	N/A 0.037 in0.325 in
R Rad. Max.	N/A 0.025 in
S Design Ref. Only Max.	N/A 0.319 in
Single Shear^1,2	N/A 8500 lb
Tensile¹	N/A 5200 lb
Hole Limits	N/A 0.328 in0.331 in
Grip Dash No.	N/A 09
Design Grip Range Min.	N/A 0.531 in
Design Grip Range Max.	N/A 0.595 in
L Ref.	N/A 0.818 in
M Max.	N/A 1.055 in
Material Sleeve	N/A Alloy Steel
Material Pin	N/A 8740 Alloy Steel per ASTM-A-331, ASTM-A-29, or ASTM6322
Material Mechanical Lock	N/A A286 per Chemistry of AMS5737 or 316 CRES per Chemistry of AMS5690
Material Optional Drive Washer	N/A Alloy Steel
Protective Treatment Sleeve	N/A Cadmium Coat per QQ-P-416 Type II Class 2 or Aluminum Coating per MIL-C-83488
Protective Treatment Pin	N/A Cadmium Coat Unbrightened Cyanide per QQ-P-416 Type 1 Class 3 with Hydrogen Embrittlement Relief per MIL-F-81177 or Aluminum Coating per MIL-C-83488
Protective Treatment Mechanical Lock	N/A Passivate per QQ-P-35
Lubrication	N/A Option to Lubricate Mechanical Lock Only. Lox Compatible Dry Film Lube, DOD-L-85645 Type 1.

N/A

Minimum ultimate single shear and tensile strengths, in pounds, of installed fastener.
Applies to OUB100-T05-04, 06-05, 08-06, 10-07, 12-09 and up. In shorter grips a true composite shear test cannot be obtained.
.016 minimum shear bearing for oversize 05, .020 for 06, .026 for 08, .031 for 10 and .038 for 12 diameters.
Solid or split lock collar - Manufacturer's option. Split not to exceed .020 width.
Knurled to facilitate fastener assembly. Not part of installed fastener.
Maximum diameter of blind head shall not exceed maximum diameter of manufactured head "A", for engineering design ref. only.
Blind side head may be installed on 5° maximum slope.
Trim flash not to exceed .005 maximum length above head of pin.
05 and 06 diameter part numbers are color identified green on pintail or drive washer.
Manufacturer's option to add (zero) prefix to diameter (05, 06 & 08) and grip numbers in Huck part No. Example OUB100-T06-03.
Identification: Manufacturer's option - Huck symbol. "O" and grip dash number.
Concentricity: Conical surface of flush head to "D" diameter to be within .003 TIR. Head roundness to be within .010.
Drive washer available to facilitate installation only. Not part of installed fastener.
Procurment spec NASM 8975 except for 1/64 oversize shank diameter and installation hole size.
Below .088 top sheet thickness for 05, .100 for 06, .131 for 08, .168 for 10 and .203 for 12 diameters. Double dimpling is recommemded. .020 minimum bottom sheet required for all applications.
The grip range of OUB100-T06-02 is .120 to .157.

Email ^*
First Name ^*
Last Name ^*
Company ^*
Country ^*
Zip/Postal Code ^*

Nominal Diameter

A Head Theo Inter Max.

B Head Height Max.

C Min.

D Sleeve Dia.

E Max.

F Max.

G Gage Dia. ± .0001

H Gage Height

R Rad. Max.

S Design Ref. Only Max.

Single Shear1,2

Tensile1

Hole Limits

Grip Dash No.

Design Grip Range Min.

Design Grip Range Max.

L Ref.

M Max.

Material Sleeve

Material Pin

Material Mechanical Lock

Material Optional Drive Washer

Protective Treatment Sleeve

Protective Treatment Pin

Protective Treatment Mechanical Lock

Lubrication

Single Shear^1,2

Tensile¹