Item # RF9810-06-13, RF9800-( )-13 - Adapter - Reducer, Port Connection, Ring Locked to Flared Tube End, Captivated Lift Type Locking On Howmet Aerospace

Catalog > Fluid Fittings > Ring Locked Fittings > Adapter - Reducer > RF9800-( )-13 - Adapter - Reducer, Port Connection, Ring Locked to Flared Tube End, Captivated Lift Type Locking > Item # RF9810-06-13

Request Information

THREAD: AS8879 Class-3A

MATERIALS:

Fitting: 6AI-4V titanium per AMS4928, AMS4965 or AMS4967, 130 KSI UTS MIN.
Lockring: A286 cres per AMS5731, AMS5732, AMS5734 or AMS5737, 34-40 HRC.

FINISH:

Fitting: Anodic treatment per AMS2488, Type 2.
Lockring: Passivate per AMS2700, Type 2.

Unit of Measure

Tube OD (REF)	N/A 0.375
A Thread AS8879 Class-3A	N/A 0.5625-18 UNJF
B Thread AS8879 Class-3A	N/A 0.6875-24 UNJEF
C (± .005)	N/A 1.040
D (± .005)	N/A 0.498
E (+.005/-.002)	N/A 0.625
F (MIN)	N/A 0.717
G (REF)	N/A 0.824
H (+.010/-.005)	N/A 1.018
J (+.000/-.015)	N/A 0.465
K (+.010/-.005)	N/A 0.125
L (± .007)	N/A 0.210
O-Ring Size (REF)	N/A AS568-016
Port PS10035(AS1300)	N/A PS10035-10
N (MAX)	N/A 0.130
P (± .020)	N/A 0.838
Porting Tool No.	N/A RPT10
O-Ring Installation Tool Number	N/A ORT687
Lockring Drive Tool Part Number	N/A RF9810DEK
Removal Tool Part Number	N/A RF10LPDE

Wrench Part Number

N/A RF6910W

N/A ENGINEERING INFORMATION:
a. THESE PARTS ARE PRIMARILY DESIGNED FOR USE IN 4000 PSI HYDRAULIC WORKING PRESSURE SYSTEMS (SAE PROCUREMENT SPECIFICATION NUMBER AS4841) COMPATIBLE WITH TITANIUM.
b. THESE PARTS PROVIDE SEMI-PERMANENT MALE ADAPTER INSTALLATIONS IN VALVE AND CYLINDER BODIES, MANIFOLD ETC...
c. SERRATED LOCKRING PREVENTS ROTATION WHEN MATING LINES ARE ATTACHED OR REMOVED.

N/A INSTALLATION INFORMATION:
d. ADAPTERS TO BE INSTALLED AND REMOVED PER METHOD DESCRIBED IN HFS RFK9800 AND RFK9900 SERIES CATALOG.
e. "N" AND "P" STAND-OFF DIMENSIONS ARE FOR DESIGN PURPOSES ONLY. DO NOT USE AS INSTALLATION DATA.
f. O-RINGS MUST BE SPECIFIED SEPARATELY AND SHALL BE SELECTED BASED ON SYSTEM FLUID AND TEMPERATURE AND ARE NOT SUPPLIED BY HFS.

N/A NOTES: UNLESS OTHERWISE SPECIFIED
3. LOCKRING RETAINED ON ADAPTER BY CONTROLLED INTERFERENCE FIT. LOCKRING CAPTIVATED .005-.015 FROM FLANGE CHAMFER.
4. SEALING SURFACE: NO VISIBLE DEFECTS. TO BE PROTECTED FOR SHIPMENT. TAKE CARE IN HANDLING.
5. THIS PART IS USED IN CONJUNCTION WITH AN O-RING. O-RING SIZE PER AS568.
6. FITTING TUBE END PER AS4395 STYLE "E" FOR TUBE SIZE SPECIFIED.
7. THREAD CHAMFER ANGLES: 45°±5°, 4 PLACES.
8. IDENTIFICATION:

MARK AT LOCATION SHOWN PER AS478 METHOD 2 OR 15, MANUFACTURER'S NAME, TRADEMARK OR CAGE CODE.

MARK PER AS478 METHOD 35D. NAME, TRADEMARK OR CAGE CODE, AND PART NUMBER.

9. ALL MACHINED SURFACES SHALL BE SMOOTH TO 125 MICROINCHES Ra, SERRATION 250 MICROINCHES Ra AND SEALING SURFACES 63 MICROINCHES Ra PER ASME B46.1.
10. PROCUREMENT SPECIFICATION: AS4841 EXCEPT AS SPECIFIED ON THIS DRAWING.

Email ^*
First Name ^*
Last Name ^*
Company ^*
Country ^*
Zip/Postal Code ^*

Tube OD (REF)

A Thread AS8879 Class-3A

B Thread AS8879 Class-3A

C (± .005)

D (± .005)

E (+.005/-.002)

F (MIN)

G (REF)

H (+.010/-.005)

J (+.000/-.015)

K (+.010/-.005)

L (± .007)

O-Ring Size (REF)

Port PS10035(AS1300)

N (MAX)

P (± .020)

Porting Tool No.

O-Ring Installation Tool Number

Lockring Drive Tool Part Number

Removal Tool Part Number