close
close
close
Request Information
Unit of Measure

Nominal Diameter No.

 N/A 6

A - Diameter +.003 -.001

 N/A 0.189 in

B - Diameter ± .004 Theo

 N/A 0.299 in

BK Min

 N/A 0.415 in

C

 N/A 0.046 in

E

 N/A 0.002-0.012 in

H

 N/A 0.940 in

J - Diameter

 N/A 0.192 in

S - Diameter

 N/A 0.117 in
Tensile1 N/A 560 lb

Installed Spindle Retention

 N/A 290

Hole Limits

 N/A 0.192-0.196 in

Design Grip Range Min.

 N/A 0.501 in

Design Grip Range Max.

 N/A 0.562 in

L +.000 -.030

 N/A 0.700 in

M Max

 N/A 0.950 in

Material Sleeve

 N/A 5056 Aluminum per QQ-A-430

Material Spindle

 N/A 8740 Alloy Steel per AMS 6322

Material Expander

 N/A 1038 Alloy Steel

Material Washer

 N/A Alloy Steel

Material Lock Ring

 N/A A286 Stainless Steel per AMS 5737

Finish Sleeve

 N/A Clear Chromate per MIL-C-5541

Finish Spindle

 N/A Cadmium Plate per AMS-QQ-P-416, Type II, Class 2

Finish Expander

 N/A Cadmium Plate per AMS-QQ-P-416, Type II, Class 2

Finish Washer

 N/A Gold Chromate

Finish Lock Ring

 N/A Passivate per AMS-QQ-P-35

Head Style

 N/A NAS 1097 100° Flush

Sleeve Diameter

 N/A Nominal

N/A

  • Lubrication: Lubricate per NAS 1686 except on sleeve component. If lubed, restrict to tiolon Y-14 only for maximum paint adhesion properties. Do not clean or degrease prior to installation. Lubricant must not be removed.
  • <3> Gold color driving anvil identifies nominal diameter.
  • Spindle configuration - pulling serration dimensions shall be per NAS 9315.
  • 1 Minimum ultimate shear and tensile strength, in pounds, of installed rivet.
    Applies to grips 4-03 max, 5-03 max, 6-04 max and up.