close
close
close
Request Information
Unit of Measure

Nominal Diameter No.

 N/A 4

A - Diameter +.003 -.001

 N/A 0.126 in

B - Diameter ± .010

 N/A 0.250 in

BK Min

 N/A 0.355 in

E +.010 -.000

 N/A 0.054 in

G Max

 N/A 12.000 º

H

 N/A 0.870 in

J - Diameter

 N/A 0.129 in

S - Diameter

 N/A 0.081 in
Tensile1 N/A 285 lb

Installed Spindle Retention

 N/A 125

Hole Limits

 N/A 0.129-0.132 in

Design Grip Range Min.

 N/A 0.063 in

Design Grip Range Max.

 N/A 0.125 in

L +.000 -.030

 N/A 0.224 in

M Max

 N/A 0.450 in

Material Sleeve

 N/A 5056 Aluminum per QQ-A-430

Material Spindle

 N/A A286 Stainless Steel per AMS 5737

Material Expander

 N/A A286 Stainless Steel AMS 5737 or 300 CRES per ASTM A-493 or ASTM A581

Material Washer

 N/A Alloy Steel

Material Lock Ring

 N/A A286 Stainless Steel per AMS 5737

Finish Sleeve

 N/A Clear Chromate per MIL-C-5541

Finish Spindle

 N/A Passivate per AMS-QQ-P-35

Finish Expander

 N/A Passivate per AMS-QQ-P-35 or None

Finish Washer

 N/A Gold Chromate

Finish Lock Ring

 N/A Passivate per AMS-QQ-P-35

Head Style

 N/A Protruding

Sleeve Diameter

 N/A Nominal

N/A

  • Lubrication: Lubricate per NAS 1686 except on sleeve component. If lubed, restrict to tiolon Y-14 only for maximum paint adhesion properties. Do not clean or degrease prior to installation. Lubricant must not be removed.
  • <3> Gold color driving anvil identifies nominal diameter.
  • Spindle configuration - pulling serration dimensions shall be per NAS 9315.
  • 1 Minimum ultimate shear and tensile strength, in pounds, of installed rivet.
    Applies to grips 4-03 max, 5-03 max, 6-04 max and up.