Howmet
Stud Type |
N/A Shear Load |
Material |
N/A Chrome Moly Steel, Type 4140 per MIL-S-5626 or Type 8740 per AMS 6322, 125 KSI Minimum Tensile Strength |
Finish Description |
N/A Cadmium Plate per QQ-P-416, Type II, Class 2 |
Nut End Thread Size |
N/A 0.4375-20 UNJF-3A |
Nut End Thread Length ± 0.030 |
N/A 0.660 |
Drill Option |
N/A None |
Stud End Thread Size |
N/A 0.5000-20 UNJF-3A |
Shear Engagement Area (in²) Ref. |
N/A 0.5416 |
L ± 0.010 |
N/A 0.812 |
Tap Drill Diameter |
N/A 0.452 - 0.457 |
C Drill Diameter +0.010 / -0.000 |
N/A 0.500 |
C Drill Depth +.010 / -.000 |
N/A 0.187 |
Tap Size |
N/A 0.5000-20 UNJF-3B |
Minimum Tap Thread Depth |
N/A 0.870 |
Hand Installation Tool Part Number |
N/A TS 7 |
Max NL Length utilized by Installation Tool |
N/A 2.500 |
Removal Drill Depth ±.010 |
N/A 0.1560 |
Nut End Note |
N/A Substitute the Nut End Length (NL), in 1/16 inch increments, for the parentheses in the part number. For example, KNS720JM-22SZ indicates a stud with a nut end length (NL) of "22" = 22/16 = 1-3/8 or 1.375 in |
Removal Drill Size |
N/A 0.4380 |
