close
close
close
Request Information
THREAD: AS8879
MATERIAL:
  • 7075 Aluminum alloy per AMS - QQ - A - 225/9 (UNS A97075), or 7175 Aluminum alloy with chemistry per AMS4149 (UNS A97175).
HEAT TREAT: T73 Condition
FINISH:
  • Chemical conversion coating per MIL - DTL - 5541, dry film lubricant coat per MIL - L - 23398, plus (Optional) cetyl alcohol lubricant.
PERFORMANCE: ENS1313
Unit of Measure

Specifications

A

 N/A 0.418-0.424 in

B

 N/A 0.268-0.274 in

C

 N/A 0.359 in

D

 N/A 0.323 in

L - MAX

 N/A 0.340 in

M

 N/A 0.323 in

X

 N/A 0.097 in

Drive Tool Dash No.

 N/A -8

Axial Tensile Strength lbf Min

 N/A 3000.000 lb

Thread per AS8879

 N/A 0.2500-28 UNJF-3B

Nominal Stud Nut Size

 N/A 1/4-28

Material

 N/A Aluminium

Heat Treat

 N/A T73 Condition

Finish

 N/A Chemical conversation coating per MIL-DTL-5541, dry film lubricant coat per MIL-L-23398, plus (optional) cetyl alcohol lubricant.

Performance

 N/A ENSI313

Notes

Notes

 N/A 1. Dimensions to be met after finish, but before lubrication.
2. All EDDIE-NUTS™ must be installed using an appropriate DELTA-RAD™ EDDIE-BOLT® installation tool.
3. Nuts shall be packaged in clear, sealed plastic bags, Each bag shall contain a maximum of 100 nuts per diameter. Each bag shall be marked with "EDDIE-NUTS™", Manufacturer´s complete part number, Manufacturer´s lot number, Manufacturer´s name and "PART" date.