close
close
ACCU-LOK® blind fastener for composite application head head titanium.
Unit of Measure

Dash Number (Grip)

150

Grip Range - Min. Grip

0.100 in

Grip Range - Max. Grip

0.150 in

Grip Range

0.100-0.150 in

A Hex

0.500 in

B Min

0.548 in

D

0.375 in

E Max

0.374 in

F Wrench Flats

0.185 in

G Ref

0.080 in

H

0.133 in

L Ref

1.090 in

R Rad

0.040 in

T Across Hex Ref

0.500 in

Minimum available grip length

-150

Recommended Hole Size

0.375-0.378

J Dia Min

0.575 in

K Max

0.625 in

Break off Limits <5><7>

0.000-0.103

Tensile Structural Failure (Min)

5000 lb

Double Shear Min

16450 lb

Locking Torque Min

4.000 lb-in0.452 N-m

Material and Heat Treat

1.Nut: 6AL-4V titanium per AMS 4928 or AMS 4967; heat treated per MIL-H-81200 to 95 ksi shear strength minimum. Maximum hydrogen content 125 ppm.
2.Screw: A286 per AMS 5731, AMS 5732 or AMS 5737; heat reated to 175 ksi tensile minimum.
3.Sleeve: 304 stainless steel per AMS 5639, heat treated as required for performance.
4.Insert: Acetal per ASTM D4181
5.DryvcapTM: Mild steel (color gray).

Finish

1.(-) Nut: KAL-GARD ANN-RO #1012 conversion coating or phosphate flouride per AMS 2488 may be used at manufacturer´s option.
2.Sleeve & screw: Passivate per AMS 2700, KAL-GARD ANN-RO #1013 conversion coating optional.
3.Insert: None
4.Dryvcap<

Lubricants

The following lubricants may be applied to any or all components in any combination as required for performance unless otherwise specified: Dry film lube per AS5272, Type I, everlube #812, paraffin wax, or cetyl alcohol per MIL-L-87132.

Applicable Specification

1.Procurement specification: FCBF200
2.Special lube and finish: FCBF202

Material Type

Titanium

Rated Shear Strength

75 KSI

Headstyle

Hex Protruding