Series |
N/A SHF( ) |
Material Specification |
N/A ASTM A582 or AMS 5640 |
Material |
N/A 303 Se CRES |
Heat Treat |
N/A None |
Finish |
N/A Passivate per AMS 2700 |
Lockring Part Number |
N/A RL56SA8 |
Nut End Type |
N/A Undrilled |
A Nut End Thread Size |
N/A 0.6250-18 UNF-3A |
B Stud End Thread Size |
N/A 0.7500-10 |
B Stud End Thread-Pitch Diameter |
N/A 0.6866-0.6891 in |
B Stud End Thread-Minor Diameter |
N/A 0.6156-0.6314 in |
D ±.015 |
N/A 1.000 in |
E - Dia +.000 -.005 |
N/A 0.870 in |
F ±.015 |
N/A 1.120 in |
G ±.005 |
N/A 0.341 in |
H ±.005 |
N/A 0.191 in |
L ±.015 |
N/A 1.062 in |
C Min. Full Thread Length |
N/A 1.062 in |
M |
N/A 0.7500-10 UNJC-3B |
N -Dia +.003 -.000 |
N/A 0.875 in |
P - Cbore Depth without O-ring |
N/A 0.201 in |
Q - Cbore Depth with O-ring |
N/A 0.274 in |
Tap Drill Size |
N/A 0.656 in |
O-Ring Size |
N/A AS568-115 |
Counterbore Tool Part Number |
N/A RC56-656 |
Basic Tap Size |
N/A 0.7500-10 UNC |
Drive Wrench Number |
N/A R1111W |
Lockring Drive Tool Part Number |
N/A S161D16 |
Removal Tool Part Number |
N/A BT8063 |
Notes |
N/A
|