close
close
close
Request Information
SRM( )( )L, Metric, Self Locking, 235°C Dry Film Lube
Unit of Measure
T1 Thread -4H6H/4H5H1 N/A MJ7x1

T2 Thread -4g

 N/A M9x1

A Diameter

 N/A 7.290 mm

B Rad Min

 N/A 3.220 mm

C ± 0.20

 N/A 3.550 mm

D Ref

 N/A 2.700 mm

E Min

 N/A 1.750 mm
L ± 0.32 N/A 13.300 mm
Weight per 10003 N/A 1.860 kg
Length Code4 N/A B

Material Type

 N/A 17-4PH CRES per AMS 5643

Heat Treat

 N/A COND H1025 1100 MPa Min UTS

Finish

 N/A Solid Film Lubricant

Internal Thread Lock

 N/A Yes

N/A a. The Slimsert is wrenched into the parent material to depth shown in figure with wrench.
b. Swage the collar of the insert out until it presses into the wall of the counterbore "G" diameter, using swage tool.
c. The slimsert is installed when the shoulder of the swage tool bottoms on the surface of the parent material.
d. For installation into hard materials contact us.

  • 1 TOLERANCE CLASS: -4H6H for ≤ MJ5x0.8, 4H5H for > MJ5x0.8
  • 2 Direction for "L" length determination
  • 3 Weights approximative, calculated with a density of 7.93 Kg/dm³
  • 4 For Length Code determination see Minimum Tensile Strength of Screw Connection Table Image.