Howmet
Series |
N/A SF(T)5902 |
Material |
N/A TI-6AL-4V Titanium per AMS4967 or MIL-T-9047 |
Heat Treat |
N/A 35 HRC ( 160 KSI min) |
Finish |
N/A None |
Military Part Number |
N/A MS51992C503-19 |
Lockring - Low Strength Magnesium |
N/A RL1997-103 |
Lockring - Aluminum |
N/A RLRR1997-103 |
Lockring Part Number |
N/A RLRR1997E103 |
Lockring Military Part Number |
N/A MS51997E103P |
Nut End Type |
N/A Undrilled |
A Nut End Thread Size |
N/A 0.2500-28 UNJF-3A |
Stud End type |
N/A Recess |
B Stud End Thread Size |
N/A 0.3750-24 |
B Stud End Thread-Pitch Diameter |
N/A 0.3512-0.3497 in |
B Stud End Thread-Minor Diameter |
N/A 0.3271-0.3185 in |
C ±.020 |
N/A 0.486 in |
D - Dia |
N/A 0.249-0.246 in |
E - Dia +.005 -.004 |
N/A 0.255 in |
F - Dia +.007 -.002 |
N/A 0.284 in |
G - Dia +.000 -.015 |
N/A 0.318 in |
H - Dia Min |
N/A 0.233 in |
J |
N/A 17.000 |
K +2 -1 |
N/A 86.000 º |
M |
N/A 0.281 in |
N -Dia |
N/A 0.202 in |
T ±.015 |
N/A 0.594 in |
V ±.016 |
N/A 0.142 Inch |
P - Dia ±.010 |
N/A 0.190 in |
L ±.015 |
N/A 1.188 in |
Grip Length |
N/A 0.594 in |
Shank Length |
N/A 0.125 in |
Step Drill Part Number |
N/A SDC390JC |
Drive Wrench Number |
N/A R1105W |
Lockring Drive Tool Part Number |
N/A SF5902-3D |
Notes |
N/A
|
