close
close
Broach Tool - Poco Graphite Electrical Discharge Machining, PS10035 Port Serrations

NOTES: Unless Otherwise Specified
  • MATERIAL: UNION POCO GRADE EDM-3 GRAPHITE, with option of alloy steel shank.
  • This tool is designed to provide approximately 10 times the life of tools made from brass (RFOPB5000ED Series).
  • When using this tool, the machine should be set to produce a burn which is .009 to .011 larger on the diameter than “A”. This will allow the lockring to fit into the serration produced with about .004 to .005 clearance. The applicable lockring may be used to gage the port serration
CAUTION: Care must be taken when machining to provide the following requirements: A maximum runout of .009 must be maintained between serration major dia and controlled minor dia (specified in Rosan®PS10035 port specification) after machining.
1 - 13 of 13 | Results Per Page | View | Unit of Measure
1 

Item #

A (+.002/-.004)

Number of Teeth

B ± .002

C ± .010

To Produce
Serrations for
Port Number

Sort by
N/A 0.399 Inch N/A 24 N/A 0.312 Inch N/A 0.109 Inch N/A PS10035-02
N/A 0.468 Inch N/A 26 N/A 0.375 Inch N/A 0.125 Inch N/A PS10035-03
N/A 0.514 Inch N/A 30 N/A 0.375 Inch N/A 0.125 Inch N/A PS10035-04
N/A 0.624 Inch N/A 36 N/A 0.500 Inch N/A 0.156 Inch N/A PS10035-05
N/A 0.699 Inch N/A 36 N/A 0.500 Inch N/A 0.156 Inch N/A PS10035-06
N/A 0.814 Inch N/A 40 N/A 0.500 Inch N/A 0.156 Inch N/A PS10035-08
N/A 1.040 Inch N/A 38 N/A 0.500 Inch N/A 0.156 Inch N/A PS10035-10
N/A 1.170 Inch N/A 40 N/A 0.750 Inch N/A 0.156 Inch N/A PS10035-12
N/A 1.341 Inch N/A 50 N/A 0.750 Inch N/A 0.156 Inch N/A PS10035-14
N/A 1.456 Inch N/A 36 N/A 0.750 Inch N/A 0.156 Inch N/A PS10035-16
N/A 1.782 Inch N/A 56 N/A 1.000 Inch N/A 0.156 Inch N/A PS10035-20
N/A 2.032 Inch N/A 81 N/A 1.500 Inch N/A 0.156 Inch N/A PS10035-24
N/A 2.548 Inch N/A 102 N/A 1.500 Inch N/A 0.156 Inch N/A PS10035-32
1 - 13 of 13 | Results Per Page | View | Unit of Measure
1