close
close
MATERIAL: Nut and spherical washer: A286 per AMS5525, AMS5732, AMS5737.

HARDNESS: ROCKWELL 49 maximum.

FINISH: Silver plate per AMS2410. Plate thickness measured on any external surface of the nut shall not be less than 0.0002 inch. Threads shall show complete coverage but thickness requirement on thread is waived. Optional silver plate on nut retaining cage and spherical washer.

PERFORMANCE: In accordance with NASM25027.

THREADS: In accordance with AS8879

FLOATABILITY: .025 radially from center.

MISALIGNMENT: 8° in any direction from centered position.

VARIATION: Add « K » for bottom c’sunk rivet holes, for example: LAONM53K.

APPLICATION: Type LAONM nuts are two lug, self aligning anchor nuts designed for use in shear or tensile applications involving temperatures up to 800° F. The LAONM features a self aligning design which qualifies it for use in applications involving not only radial but vertical misalignment of bolts at assembly to the limitations designed. Added advantages areas also provided in weight and stock savings on shims and bolts due to the flexibility in thread length provided by the counterbore to permit use of either full or shear thread length bolts.

Contact Howmet for the diameter/type in manufacturing.
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 

Item #

A - MAX

B - MAX

C ±.005

D - MIN

H - MAX

J ±.002

L - MIN

Thread

Sort by
N/A 0.912 Inch N/A 0.500 Inch N/A 0.344 Inch N/A 0.194 Inch N/A 0.322 Inch N/A 0.688 Inch N/A 0.125 Inch N/A 0.1900-32 UNJF-3B
N/A 1.265 Inch N/A 0.562 Inch N/A 0.500 Inch N/A 0.254 Inch N/A 0.406 Inch N/A 1.000 Inch N/A 0.141 Inch N/A 0.2500-28 UNJF-3B
N/A 1.291 Inch N/A 0.735 Inch N/A 0.500 Inch N/A 0.317 Inch N/A 0.469 Inch N/A 1.000 Inch N/A 0.188 Inch N/A 0.3125-24 UNJF-3B
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1