Titanium, 100° Intermediate Crown Head for Shear/Tension Metallic Applications
Part Family |
N/A XPL |
Head Style |
N/A 100° Flush |
Type |
N/A Shear/Tension |
Application |
N/A Metallic |
Pintail Configuration |
N/A Pull-In Pintail |
Material |
N/A 6Al-4V Titanium Alloy per AMS4967, 95KSI Minimum Shear Strength |
Finish Description |
N/A Uncoated Pin plus cetyl alcohol lube per MIL-L-87132 |
Sealant Escape Groove |
N/A No |
Nominal Size |
N/A 0.3750 |
A Shank Dia
|
N/A 0.3740 |
(B) Theoretical Dia Nom |
N/A 0.6347 |
(C) Head Height Nom |
N/A 0.1094 |
F Flat Dia
|
N/A 0.312 |
G Gage Dia
|
N/A 0.4853 |
H Gage Height Max |
N/A 0.0679 |
H Gage Height Min |
N/A 0.0643 |
J Max |
N/A 0.015 |
(L) Ref |
N/A 0.300 |
M Max |
N/A 0.370 |
P Dia. Max |
N/A 0.370 |
R Rad
|
N/A 0.035 |
S |
N/A 0.0060 |
(T) Ref |
N/A 0.372 |
U
|
N/A 0.0034 |
(U') Ref |
N/A 0.0030 |
Shear Mating Collar Part Number |
N/A XSC-C12 |
Minimum Double Shear Strength with XSC Collar, pounds |
N/A 21000 |
Minimum Ultimate Tensile Strength with XSC Collar, pounds |
N/A 7000 |
Typical Tensile Strength with XSC Collar, pounds |
N/A 7350 |
Pin Position Swage Gauge with XSC Collar |
N/A TBD |
Shear/Tension Mating Collar Part Number |
N/A XMC-LV12 |
Minimum Double Shear Strength with XMC Collar, pounds |
N/A 21000 |
Minimum Ultimate Tensile Strength with XMC Collar, pounds |
N/A 10200 |
Typical Tensile Strength with XMC Collar, pounds |
N/A 10710 |
Pin Position Swage Gauge with XMC Collar |
N/A HG164-12 |
Minimum Grip Length Number |
N/A 15 |
Maximum Grip Length Number |
N/A 41 |
Grip Range |
N/A 1/8 in |
|
N/A The parentheses in the part number indicate the grip length number of the pin. The grip length number indicates the maximum design grip, in 1/16 inch increments. For example, XPL4MC-V12L15 has a maximum design grip length of 15/16 inch or .938 inches. The grip length number must be odd and between the minimum grip length number and the maximum grip length number. |
