Howmet Fastening Systems
Howmet Fastening Systems
Phone: Sales +1 800 992 4444
Technical Support +1 310 784 6409
Email: HFSTechSupport@howmet.com
Website: www.hfs.howmet.com
Print Back
Broach Tool Wobble Broach Machining, PS10035 Port Serrations

NOTES: Unless Otherwise Specified
  • Wobbling Drift Hold is ordered separately using part number W37601.00
  • CAUTION: Care must be taken when machining to provide the following requirements: A maximum runout of .009 must be maintained between serration major dia and controlled minor dia (specified in Rosan PS10035 port specification) after broaching.
RFOPB5000WB_primary
Unit of Measure
Items RFOPB5000WB_primary
RFOPB5002WB
RFOPB5000WB Broach Tool Wobble Broach Machining 		RFOPB5000WB_primary
RFOPB5003WB
RFOPB5000WB Broach Tool Wobble Broach Machining 		RFOPB5000WB_primary
RFOPB5004WB
RFOPB5000WB Broach Tool Wobble Broach Machining 		RFOPB5000WB_primary
RFOPB5005WB
RFOPB5000WB Broach Tool Wobble Broach Machining 		RFOPB5000WB_primary
RFOPB5006WB
RFOPB5000WB Broach Tool Wobble Broach Machining
B Number of Teeth N/A 24 N/A 26 N/A 30 N/A 36 N/A 36
A ± .002 N/A 0.412 Inch N/A 0.481 Inch N/A 0.527 Inch N/A 0.638 Inch N/A 0.713 Inch
To Produce
Serrations for
Port Number 		N/A PS10035-02 N/A PS10035-03 N/A PS10035-04 N/A PS10035-05 N/A PS10035-06