Howmet Aerospace - RFOPB5000ED2 Broach Tool - Poco Graphite Electrical Discharge Machining

Broach Tool - Poco Graphite Electrical Discharge Machining, PS10035 Port Serrations

NOTES: Unless Otherwise Specified

MATERIAL: UNION POCO GRADE EDM-3 GRAPHITE, with option of alloy steel shank.
This tool is designed to provide approximately 10 times the life of tools made from brass (RFOPB5000ED Series).
When using this tool, the machine should be set to produce a burn which is .009 to .011 larger on the diameter than “A”. This will allow the lockring to fit into the serration produced with about .004 to .005 clearance. The applicable lockring may be used to gage the port serration

CAUTION: Care must be taken when machining to provide the following requirements: A maximum runout of .009 must be maintained between serration major dia and controlled minor dia (specified in Rosan®PS10035 port specification) after machining.

Unit of Measure

Items	RFOPB5002ED2 RFOPB5000ED2 Broach Tool - Poco Graphite Electrical Discharge Machining	RFOPB5003ED2 RFOPB5000ED2 Broach Tool - Poco Graphite Electrical Discharge Machining	RFOPB5004ED2 RFOPB5000ED2 Broach Tool - Poco Graphite Electrical Discharge Machining	RFOPB5005ED2 RFOPB5000ED2 Broach Tool - Poco Graphite Electrical Discharge Machining	RFOPB5006ED2 RFOPB5000ED2 Broach Tool - Poco Graphite Electrical Discharge Machining
A (+.002/-.004)	N/A 0.399 Inch	N/A 0.468 Inch	N/A 0.514 Inch	N/A 0.624 Inch	N/A 0.699 Inch
Number of Teeth	N/A 24	N/A 26	N/A 30	N/A 36	N/A 36
B ± .002	N/A 0.312 Inch	N/A 0.375 Inch	N/A 0.375 Inch	N/A 0.500 Inch	N/A 0.500 Inch
C ± .010	N/A 0.109 Inch	N/A 0.125 Inch	N/A 0.125 Inch	N/A 0.156 Inch	N/A 0.156 Inch
To Produce Serrations for Port Number	N/A PS10035-02	N/A PS10035-03	N/A PS10035-04	N/A PS10035-05	N/A PS10035-06