Blind Bolt Fastener, High Strength, Friction Thread Lock, Threaded, 100° Flush Tension Head, Titanium/A-286 (95 KSI Shear)
| Items |
 ER213-05-03 ER213 |
ER213-05-04 ER213 |
ER213-05-05 ER213 |
ER213-05-06 ER213 |
ER213-05-07 ER213 |
|||||
| Nominal Diameter | 0.1640 Inch | |||||||||
| Nominal Diameter No. | 05 | |||||||||
| A Theo Inter Ref. | 0.3304 Inch | |||||||||
| J Max. | 0.010 Inch | |||||||||
| C Driver Length Ref. | 0.250 Inch | |||||||||
| D Shank Dia. | 0.1625 Inch0.1635 Inch | |||||||||
| E Spline O.D. Ref. | 0.180 Inch | |||||||||
| F Head Height Ref. | 0.070 Inch | |||||||||
| R Radius Max. | 0.015 Inch | |||||||||
| G Gauge Dia. | 0.2830 Inch0.2832 Inch | |||||||||
| H Gauge Height | 0.0175 Inch0.0202 Inch | |||||||||
| Min. Single Shear Strength | 2005 lb | |||||||||
| Min. Tensile Strength | 1400 lb | |||||||||
| K Lead-In Dia. | 0.1539 Inch0.1565 Inch | |||||||||
| M Ref. | 0.060 Inch | |||||||||
| BD Dia. Min. - Extended Grip | 0.205 Inch | |||||||||
| BD Dia. Min. - Design Grip | 0.213 Inch | |||||||||
| Design Grip Range Min. | 0.126 Inch | 0.188 Inch | 0.251 Inch | 0.313 Inch | 0.376 Inch | |||||
| Design Grip Range Max. | 0.187 Inch | 0.250 Inch | 0.312 Inch | 0.375 Inch | 0.437 Inch | |||||
| L | 0.513 Inch | 0.576 Inch | 0.638 Inch | 0.701 Inch | 0.763 Inch | |||||
| Material Sleeve | A286 CRES | |||||||||
| Material Core Bolt | 6Al-4V Titanium per AMS 4967 or 4928 | |||||||||
| Finish Sleeve | Passivate per AMS2700 Type 2 or Type 8 | |||||||||
| Finish Core Bolt | Incotec Tec-Lube Dry Film Lube per AS5272 or Equivalent | |||||||||
| Procurement Specification | T0108 | |||||||||
| Complete Installation Tool | ETT2000-05 | |||||||||
| Installation Nose Only | ETT2000-05N | |||||||||
| Recommended Installation Hole Sizes | 0.164 Inch0.167 Inch | |||||||||
| Installed Weight | 2.45 Lbs/1000 | 2.71 Lbs/1000 | 2.97 Lbs/1000 | 3.23 Lbs/1000 | 3.49 Lbs/1000 | |||||
|
|
||||||||||
