Howmet Aerospace - Metric, Non-Locking, 235°C Dry Flim Lube

Unit of Measure

Items	SRM0508A Metric, Non-Locking, 235°C Dry Flim Lube	SRM0610A Metric, Non-Locking, 235°C Dry Flim Lube	SRM0710A Metric, Non-Locking, 235°C Dry Flim Lube	SRM0812A Metric, Non-Locking, 235°C Dry Flim Lube	SRM0810A Metric, Non-Locking, 235°C Dry Flim Lube
T1 Thread -4H6H/4H5H¹	N/A MJ5x0.8	N/A MJ6x1	N/A MJ7x1	N/A MJ8x1.25	N/A MJ8x1
T2 Thread -4g	N/A M7x1	N/A M8x1	N/A M9x1	N/A M10x1	N/A M10x1
A Diameter	N/A 5.230 mm	N/A 6.280 mm	N/A 7.290 mm	N/A 8.320 mm	N/A 8.320 mm
B Diameter Min	N/A 4.690 mm	N/A 5.580 mm	N/A 6.580 mm	N/A 7.580 mm	N/A 7.580 mm
C ± 0.20	N/A 2.950 mm	N/A 3.150 mm	N/A 3.550 mm	N/A 3.950 mm	N/A 3.950 mm
D	N/A 2.300 mm	N/A 2.400 mm	N/A 2.700 mm	N/A 2.900 mm	N/A 2.900 mm
E Min	N/A 1.700 mm	N/A 2.000 mm	N/A 2.400 mm	N/A 2.700 mm	N/A 2.700 mm
L ± 0.3²	N/A 7.600 mm	N/A 8.900 mm	N/A 10.900 mm	N/A 12.800 mm	N/A 12.800 mm
Weight per 1000³	N/A 0.680 kg	N/A 1.050 kg	N/A 1.510 kg	N/A 2.070 kg	N/A 2.020 kg
Length Code⁴	N/A A
Material Type	N/A 17-4PH CRES per AMS 5643
Heat Treat	N/A COND H1025 1100 MPa Min UTS
Finish	N/A Solid Film Lubricant
Installation Procedure	N/A a. The Slimsert is wrenched into the parent material to depth shown in figure with wrench. b. Swage the collar of the insert out until it presses into the wall of the counterbore "G" diameter, using swage tool. c. The slimsert is installed when the shoulder of the swage tool bottoms on the surface of the parent material. d. For installation into hard materials contact us.
Internal Thread Lock	N/A No
¹ TOLERANCE CLASS: -4H6H for ≤ MJ5x0.8, 4H5H for > MJ5x0.8 ² Direction for "L" length determination ³ Weights approximative, calculated with a density of 7.93 Kg/dm³ ⁴ For Length Code determination see Minimum Tensile Strength of Screw Connection Table Image.