| Items |
 SRMW0305 Metric, Oversize Replacement, Non-locking, Internal Thread Lock, 235°C Dry Film Lube |
SRMW0407 Metric, Oversize Replacement, Non-locking, Internal Thread Lock, 235°C Dry Film Lube |
SRMW0508 Metric, Oversize Replacement, Non-locking, Internal Thread Lock, 235°C Dry Film Lube |
SRMW0610 Metric, Oversize Replacement, Non-locking, Internal Thread Lock, 235°C Dry Film Lube |
SRMW0710 Metric, Oversize Replacement, Non-locking, Internal Thread Lock, 235°C Dry Film Lube |
|||||
| A Thread1 | MJ3x0.5 | MJ4x0.7 | MJ5x0.8 | MJ6x1 | MJ7x1 | |||||
| B Thread2 | M6x1 | M7x1 | M8x1 | M10x1 | M10x1 | |||||
| C Diameter | 3.880 mm | 5.030 mm | 6.030 mm | 8.030 mm | 8.030 mm | |||||
| D ± 0.3 | 5.100 mm | 6.900 mm | 7.600 mm | 8.900 mm | 10.900 mm | |||||
| E ± 0.2 | 2.150 mm | 2.550 mm | 2.950 mm | 3.150 mm | 3.550 mm | |||||
| F | 1.600 mm | 1.900 mm | 2.300 mm | 2.400 mm | 2.700 mm | |||||
| G Min | 1.200 mm | 1.500 mm | 1.700 mm | 2.000 mm | 2.400 mm | |||||
| H Min | 2.860 mm | 3.740 mm | 4.690 mm | 5.580 mm | 6.580 mm | |||||
| Material Type | 17-4PH CRES, COND H1025 per AMS 5643 | |||||||||
| Heat Treat | Min Tensile Strength 1100 Mpa | |||||||||
| Finish | Solid Film Lubricant | |||||||||
| Installation Procedure |
a. The threaded is wrenched into the parent material to depth shown in figure with a wrench. b. Swage tool is used to swage the collar of the insert out until it presses into the wall of the counterbore "C". c. The threaded insert is installed when the shoulder of the swage tool bottoms on the surface of the parent material. |
|||||||||
| Internal Thread Lock | No | |||||||||
|
||||||||||
